Recovery — the series · Fluid Flow & Aerodynamics

What the skin settles at, before anything is done to it. The adiabatic wall temperature against Mach number, in air at 216.7 K, with the stagnation temperature above it. The gap between the two is the recovery factor, which is 0.8417 here and stays there at every Mach number — it is a property of the Prandtl number and not of the speed. At Mach 2 the skin sits at 363 K, at Mach 3 at 545 K, and at Mach 5 at 1128 K, which is past what aluminium will do. Nothing has been burnt and nothing has been rubbed: the air was brought to rest, and this is where its kinetic energy went.

The wall that heats itself

A surface told nothing about its temperature does not settle at the air's. It settles most of the way to the stagnation temperature, and the heat flux is driven from that invented temperature rather than from the free stream's — so a wall hotter than the air can be being heated by it.

part 1 · compressible

A skin lags the air by a time its own thickness sets. A skin held at one flight condition, relaxing towards the adiabatic wall temperature. The approach is exponential with a time constant ρc τ / h — 8.37 s at 2 mm, 25.1 s at 6 mm, 50.2 s at 12 mm — so the temperature a steady recovery calculation gives is reached after several minutes rather than at once. The fluid supplies one number to this calculation, the adiabatic wall temperature, and the structure supplies everything else.

The skin that lags the flight

A wall can be told its temperature or told nothing, and both are solved problems. A real skin is told neither. It has heat capacity, so its temperature is a transient whose time constant is its own thickness divided by what the layer delivers — and the number the steady calculation returns is an upper bound a short exposure never collects.

part 2 · compressible

Measuring the air temperature in flight is not measuring the air temperature. Three temperatures against Mach number in a stream at 220 K: the free stream itself, the stagnation temperature a perfect probe would read, and what a probe recovering 0.98 of the rise actually reads. At Mach 0.85 the rise is 31.79 K and the probe misses 0.64 K of it. The instrument is a small stagnation region with a thermocouple in it, so it obeys the same recovery arithmetic a wall does — a probe is a wall told nothing about its temperature, made small and put on a stalk, and its recovery factor is a calibration constant rather than a one.

The thermometer that heats itself

A total-temperature probe is a wall told nothing about its temperature, made small and put on a stalk, so it obeys the same recovery arithmetic an aircraft skin does. Its recovery factor is a calibration constant near 0.98 rather than a one — and the static temperature inferred from its reading amplifies that shortfall rather than inheriting it.

part 3 · compressible

Every output of the air-data reduction, and how hard it leans on each reading. The logarithmic sensitivity of each derived quantity to each of the three readings — the total pressure, the static pressure and the indicated total temperature — at Mach 0.3 and Mach 0.85, at 11 km with a probe recovering 0.98: a one per cent error in a reading times the number is the per cent error it puts into the output. The Mach number leans on the two pressures by 8.08 and −8.08 at Mach 0.3 and by 1.13 and −1.13 at Mach 0.85, and not at all on the temperature. The static temperature leans on its probe by exactly one and on the pressures by −0.280 at Mach 0.3 and −0.281 at Mach 0.85 — almost the same. The true airspeed leans on the probe by exactly one half and the density by exactly minus one, at every speed.

Three readings, and the one each answer leans on

An aircraft works out the air it flies through from three readings — a static pressure, a total pressure and a probe's temperature — and every derived number inherits their errors through one small table of sensitivities. Written out, the table says the airspeed is afraid of the pressure sensors almost to Mach one at cruise altitude and only to Mach 0.52 at sea level, and that the density belongs to the thermometer at every speed.

part 4 · compressible

The gradient the heat never hears

On a flat plate at a Prandtl number of one, a boundary layer's total enthalpy is a straight-line function of its velocity, whatever the wall's temperature. Put the same layer in a pressure gradient and the straight line fails everywhere except on an insulated wall, because the gradient enters the velocity's equation and not the enthalpy's — and a favourable gradient can leave a band of gas colder than the free stream above a wall three times hotter than it.

part 5 · compressible