Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Series

Rotor — the series

2 essays on one idea, from the one that introduces it to the one that assumes the rest.
  1. The loading over the disc in forward flight, at μ = 0.4. Section lift per unit span over the rotor disc, with the flight direction upwards, the advancing side to the right and the reversed-flow region outlined. The loading is not axisymmetric and cannot be: at this advance ratio the advancing blade meets 1.40 times the tip speed and the retreating one 0.60. Every quantity a hover calculation reports as a function of radius is here a function of two variables.

    The side that cannot keep up

    A hovering rotor is axisymmetric, so one radial distribution of circulation describes the whole disc. Move it forward and the advancing blade meets one and a half times the tip speed while the retreating one meets a half — and lift goes as the square of that. The rotor does not roll over, because the pitch is made a function of azimuth.

    part 1 · circulation
  2. A blade passing the vortex it shed a passage ago. The lift the blade section feels as it passes a tip vortex at five per cent of the radius. The pulse is a doublet rather than a bump — upwash on one side and downwash on the other — so the blade is pushed one way and then the other in the width of a few chords.

    A blade that flies through what it shed

    A rotor blade meets the tip vortex the blade in front of it left, a fifth of a second earlier, at a few per cent of the radius. What it feels is a doublet — five and a half degrees of upwash and then five and a half of downwash within a few chords — and the peak goes as one over the miss distance.

    part 2 · circulation

All series