Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Series

Vortex lift — the series

2 essays on one idea, from the one that introduces it to the one that assumes the rest.
  1. A lift curve that keeps climbing to 49 degrees. The lift of a slender delta of aspect ratio 1, split into the potential term that an attached flow would give and the vortex term the separation adds, with a conventional wing's curve behind them. The delta's is nonlinear from the start and reaches 1.68 at 49 degrees, where a conventional wing stalled at fifteen. That is the whole design case for the shape: not that it is efficient — it is not — but that it still has lift at incidences where an ordinary wing has none, which is what a delta-winged aircraft needs on approach and in a turn.

    Lift out of a failure

    Separation is what ends a wing's lift curve everywhere else on this site. A slender delta with sharp leading edges separates on purpose, rolls the shed sheet into a pair of vortices above its upper surface, and takes most of its lift from the suction they induce — with a curve that climbs to forty-nine degrees.

    part 1 · circulation
  2. One incidence, two lifts. Lift coefficient against incidence for a wing pitched sinusoidally through the stall, with the static curve for comparison. The loop is traversed anticlockwise: at twelve degrees the wing carries 0.22 more lift going up than coming down.

    Two lifts at one incidence

    A wing pitched up and down through the stall does not retrace its own lift curve. At twelve degrees it carries 0.22 more lift going up than coming down, and the loop that opens between the two is the work the airstream does on it — which is where the energy for a stall flutter comes from.

    part 2 · circulation

All series