Theme

The thread: One number decides the regime — page 55

Page 55 of 57, continuing through the 509 essays this motif runs through.

509 essays carry this thread — page 55 of 57.

Stalled from its leading edge, a flat plate keeps a quarter of its attached lift slope. The normal force on a flat plate over the dynamic pressure on its chord against incidence: Kirchhoff's stalled flow, by quadrature through its hodograph, with Rayleigh's closed form 2π sin α/(4 + π sin α); and the attached flat plate's 2π sin α. At 5° the stalled plate carries 0.128 against the attached 0.548; at 20°, 0.423; at 90°, 0.8798, Kirchhoff's drag. Ideal flow

A stalled plate keeps a quarter of its lift slope and moves its centre aft

Kirchhoff's free streamlines gave a plate held across a stream a drag with no viscosity in it. Tilt the plate, let the flow leave both its edges, and the same construction is a wing that has stalled from its leading edge. Rayleigh solved it in 1876, and the hodograph confirms him to seven figures: near zero incidence the stalled plate lifts at a quarter of the attached plate's rate, its centre of pressure sits at five sixteenths of the chord instead of a quarter, and its force is normal to it, so its lift-to-drag ratio is the cotangent of its incidence. A real stalled wing lifts more, by a factor the wake's pressure decides.

A cut deeper than the film's window flips the film twice a cycle; a shallower one leaves it where it is. A protection that trips at a housing excess of 3.0 and resets at 2.6, against the depth of its cut: left, the film's jumps between its branches per protection cycle; right, the cycle's period in housing times. The film has both branches between 0.6496 and 0.7279 of full drive, so a cut past 0.35 leaves it only the cool one. cut 0.3: never resets; cut 0.34: 0 flips, period 1.85; cut 0.36: 2 flips, period 0.767; cut 0.6: 2 flips, period 0.756. Viscosity

A trip deeper than the film's window flips the bearing twice a cycle

A smooth derating acts on a bearing's housing temperature as it stands. Most real protections trip instead: they cut the motor at one temperature and restore it at a lower one, a hysteresis of their own laid on top of the film's. Whether the oil then jumps between its cool and hot states is decided by one comparison — the cut's depth against the width of the film's window — and past it the protection's own band sets the rhythm. A trip never lowers the film's peak at all; it only protects the housing, and a deep one buys that with a plunge to the cool branch twice in every cycle.

The two observers disagree twelvefold about where Q says the vortices are, and not at all about the LAVD edge. The Q = 0 contours and the outermost convex LAVD level over one orbit, in the laboratory and in the frame turning with the pair. Q > 0 covers 2.00 of the window in the laboratory and 24.94 in the turning frame; the LAVD edges enclose 6.29 in the laboratory and 6.29 in the turning frame, and the two LAVD fields differ nowhere by more than 8.0e-8 of their peak. Flows and fields

An edge no observer can move still depends on what it is averaged against

The Q-criterion puts a co-rotating vortex pair in four per cent of a window for one observer and in more than half of it for another. The cure is to average, along each fluid path, how far the vorticity departs from its mean — a number no observer's rotation can change — and take the outermost convex level of it round each core. Computed, it works: both observers find two discs of radius 1.00, twice the core radius, and no fluid inside them strays from its core in an orbit. But the edge has a setting of its own. The mean must be taken over some region, and as that region grows from a radius of 4 to 20 the edge moves from 0.90 to 1.13.

Sweep slows every load's crossings by about a tenth at 35°, and leaves one root's excess over the lift standing. Against the sweep, for an elliptic wing of aspect ratio nine whose span is eight hundredths of the turbulence's integral scale: left, the lift's and one root's crossing rates as fractions of the straight wing's; right, one root's rate over the lift's. At 35° the lift crosses its mean 0.899 times as often as on the straight wing and the root 0.887; the root's excess over the lift goes from 1.19 to 1.17, and at 45° to 1.16. Circulation and lift

Sweep slows a wing root's gust cycles and leaves their excess over the lift

On a straight wing every station meets a gust at the same instant, and one wing root's bending moment crosses its mean nearly a fifth more often than the lift, because it reads the rolling half of the gust. Sweep the wing back and the outer stations meet the gust later, by their distance aft. That delay averages the gust along the flight path as a second, softer chord would: at 35° every load crosses its mean about a tenth less often, the root slightly more than the lift since its weight sits further out, and the variance hardly changes at all. The rolling excess survives almost whole.

A steady force carried round a circle sings, and each harmonic rises steeply with the tip's Mach number. The loudest level, 30 m away, of the first four blade-passing harmonics of a two-bladed 1.88 m propeller giving 2 kN of thrust from 127 kW, against its tip Mach number. At a tip Mach number of 0.4 the fundamental is 89.8 dB and the fourth harmonic 51; at 0.78, the climb, 98.2 and 88.6; at 0.95, 101 and 98.9. Compressible flow

More blades hush a propeller only while its tips are slow

A propeller's thrust and torque are steady in the blade's own frame, and a steady force held still makes no sound. Carried round a circle it sings at the blade-passing frequency, and Gutin's formula says how loudly: through a Bessel function whose order is the harmonic's and whose argument is that order times the tip's speed towards the listener over the speed of sound. Such a function is exponentially small until its argument nears its order. So spreading the same thrust over more blades, which raises the order of the fundamental, silences it by twenty-five decibels at a tip Mach number of 0.4 and by one at 0.95.

Zoomed into the inertial range, a camera needs frames faster than its window's memory says. The longest frame interval at which a run of window means still collects nine tenths of what continuous filming would, in probe integral times, against the window's diameter in integral scales, with no sweep, for one memory at every scale and for turnover and sweeping memories; dashed, the single-memory rule, 1.17 times the window mean's own memory, for the sweeping law. With the sweeping law the interval is 2.45 probe times for a window ten integral scales wide, 1.67 for one scale and 0.803 for a hundredth, where the rule says 1.18; with one memory it is 1.17 at every size. Transition and turbulence

A camera zoomed into the cascade needs frames faster than its window remembers

A wide camera window averages away the small eddies, so its mean remembers what the large eddies remember, and a run of frames is worth as many independent values as that memory allows. Zoom the window into the inertial range and the opposite is not what happens. A small window keeps nearly all the variance and almost exactly a single probe's memory — every eddy larger than itself still fills it — but much of what it keeps is the cascade's eddies, which forget far faster than the largest ones. Its frames then stop buying at an interval a third shorter than its own memory says, and a velocity gradient in the same window needs frames thirty times faster.

Freed by its inertia, a settling particle falls through a lattice of vortices several times faster than through still air. The mean settling speed of a cloud released over one cell, over its speed in still air, against the Stokes number, for still-air speeds of 0.1, 0.3 and 0.6 of the vortices' speed. 0.1: 4.82 at St = 0.02, 4.39 at 1 and 1.86 at 10; 0.3: 2.36 at St = 0.02, 1.22 at 1 and 0.605 at 10; 0.6: 1.43 at St = 0.02, 0.984 at 1 and 0.959 at 10. Without inertia most of the cloud never falls at all. Regimes and numbers

Inertia empties the vortices that would hold a settling particle, and then speeds its fall

A particle that settles slower than a lattice of vortices turns can be carried round a cell for ever: without inertia, its path is a closed curve, and Stommel showed in 1949 that half a cell can be such a trap. Give the particle the slightest inertia and every trap leaks, in a time that grows as one over its Stokes number; the freed particle is flung to the cells' edges, rides their downdraughts, and falls on average several times faster than it would through still air. More inertia undoes some of that, and a narrow band of it can hold a slow particle up indefinitely on an orbit of its own.

Sheared between plates, a gas transmits its full viscous stress down to a few free paths across, and then a share proportional to its pressure. The shear stress a gas transmits between two plates, over Navier–Stokes's μU/H, against the rarefaction δ = √π/(2Kn), from the linearised kinetic equation; with Navier–Stokes and first-order slip, 1/(1 + 2·1.016/δ), and the free-molecular δ/√π. The kinetic stress is 0.908 of μU/H at δ = 20, 0.501 at 2, 0.0979 at 0.2; the slip formula is within 2.7 per cent at δ = 1. Flows and fields

A gas's viscosity ignores its pressure until the free path reaches the walls

Maxwell predicted in 1860 that a gas's viscosity does not depend on its density — halve the pressure and half as many molecules carry momentum across the flow, each twice as far — and measured it with swinging discs in 1866: unchanged from an atmosphere to a sixtieth of one. Solved across every pressure with the kinetic equation, the shear a gas transmits between two plates obeys him over five decades and then, once the free path reaches the gap, falls in proportion to the pressure. A millimetre gap reads half the true viscosity at fifteen pascals, and a vacuum gauge reads pressure from exactly that fall.

Between plates the flow rate falls with rarefaction to a minimum near one free path across, then climbs without limit. The reduced flow rate G of a gas driven by a pressure gradient between two plates, against the rarefaction parameter δ = √π/(2Kn), from the linearised BGK equation; beside it Navier–Stokes with no slip (δ/6), with Maxwell's slip (δ/6 + 1.016) and the uncollided flux of molecules straight from a wall. The least flow rate is 1.538 at δ = 1.07, Kn = 0.827; at δ = 0.01 the solve gives 3.049, at δ = 0.001 4.449 and at δ = 10 2.769. Regimes and numbers

A thinning gas flows least at one free path across, and then more without end

Pump the gas out of a narrow channel and, for the same pressure gradient, less of it flows — until the channel is about one mean free path high. Thinner than that, more flows, and between infinite plates the flow rate climbs without limit, because the molecules carrying it are the ones skimming along the walls, whose flights only collisions with other molecules can end. Knudsen measured the minimum in 1909. The linearised kinetic equation puts it at a reduced flow rate of 1.538, at a Knudsen number of 0.83, and shows it is not a dip below the two closed forms but a place far above both.

All themes