Theme

The thread: One number decides the regime — page 11

Page 11 of 34, continuing through the 305 essays this motif runs through.

305 essays carry this thread — page 11 of 34.

The Hugoniot of a gas that can burn, and the gap in the middle of it. Pressure against specific volume, both scaled on the unburnt gas. The lower curve is the ordinary shock Hugoniot, which passes through the initial state because a jump of zero strength satisfies mass, momentum and energy. Adding a heat release lifts it away, and the initial state now sits in a region no wave can reach: between the two branches a Rayleigh line would need a positive slope, and its slope is minus the square of the mass flux. A burning gas has no weak waves available to it at all.

The other branch of the same curve

Put heat into the jump conditions and the Hugoniot lifts away from the initial state, leaving a gap no wave can occupy. A burning gas has no weak waves: it must run supersonically or subsonically, and the conservation laws pick the first speed exactly and say nothing at all about the second.

One sheared stream, and the total pressure across it. A parallel shear flow is an exact steady solution of the Euler equations, and the momentum equation requires its static pressure to be uniform. So the total pressure is entirely the dynamic pressure, which varies with the speed — by three and a fifth dynamic heads across this layer, on a flow where the static pressure does not vary at all.

What is taught wrongly

Four Bernoullis and one name

"Bernoulli's equation" names at least four statements with four different constants, three domains of validity and one shared reputation for being misapplied. A single sheared stream separates the first three: its total pressure is constant along every streamline, varies by three dynamic heads across them, and its static pressure never moves at all.

A falling drop is a bun, not a tear. The shape of a drop pressed on by the air it is falling through, computed by matching the Legendre component of a sphere's own potential-flow pressure distribution against the change in curvature it produces. The result is oblate — flattened along the direction of travel — because the pressure is high at the poles and low round the equator. The teardrop of every illustration has the wrong symmetry entirely: a drop in free fall has no up, and one at terminal speed is being pressed on from in front.

Regimes and numbers

The drop that is not a tear

A falling raindrop is flattened along the direction it is going, by the pressure of the air passing it rather than by its own weight, and the group that decides is the Weber number. The teardrop of every illustration has the wrong symmetry entirely — there is no up in the problem it is drawn for.

12 bar from stopping one metre per second. The head at the valve after it shuts, computed by the method of characteristics on a 600 m pipe. The rise is 122.4 m of water, which is ρaΔV/ρg to 1.4e-14 m — and the scheme was told neither ρaΔV nor anything else about the answer. The wave then runs to the reservoir and back every 2.000 s, and with no friction in the model it never decays: a real pipe damps this out in a few tens of cycles.

Fluids at work

Stopping water costs more than moving it

Shut a valve on water running at one metre per second and the pressure that appears is twelve bar — not because the water was pushing hard, but because the only way to stop a column of fluid is to send a message back along it, and the message travels at the speed of sound in the pipe.

$Which speed the number is formed on. The fractional change in air density at three places on a body, against the free-stream Mach number. At a stagnation point the density rises, and it reaches five per cent at M = 0.314 — which is where the familiar 0.3 comes from, and it is a five per cent tolerance rather than a physical boundary. At the suction peak the density falls instead, and how fast depends on the body: a lightly loaded section is milder than its own nose, and one working at cp₀ = −2 reaches five per cent at M = 0.22 and is at Mach 0.55 over its shoulder while the free stream is at 0.3.$ Regimes and numbers

Which speed goes in the number

The most quoted threshold in the subject — air is incompressible below Mach 0.3 — is a five per cent tolerance on the density at a stagnation point wearing a physical boundary's clothes. A wing working for its living is at Mach 0.55 over its shoulder while the free stream is still at 0.3.

$How far downstream the heat is still being made. The dissipation accumulated from a station ahead of a cylinder to a station behind it, as a fraction of the whole of what is made inside the frame, at five Reynolds numbers. At Reynolds number 1 the fluid has finished paying by about a diameter behind the body. At 100 it has not finished at five, and the curve is still climbing at the edge of the picture — the drag is a force on the body, and the heat it stands for is somewhere else.$ Viscosity

Where the heat of a drag is made

The power it takes to tow a body through a fluid becomes heat, all of it, eventually. None of the interesting words in that sentence are the first four. It is the "eventually" that decides how a wake behaves, how far a disturbance reaches, and why no box drawn round a body contains its own bill.

The Kirchhoff flow past a flat plate. A uniform stream meeting a flat plate held across it, with two streamlines leaving the edges and never returning. Between them is a wake of fluid at rest at a constant pressure. The equations solved are the same equations that give d'Alembert's paradox for a closed body, and this flow has a drag coefficient of 0.8798.

Ideal flow

Drag in the theory that forbids it

d'Alembert's paradox is a theorem about flows that close behind the body. Stop requiring that, let two streamlines leave the edges and never come back, and the same equations — no viscosity, no vorticity — produce a drag coefficient of 0.8798.

Q and the vorticity along a radius of one vortex. Two candidate measures of where the vortex is, along a radius of a Lamb–Oseen vortex. The vorticity is a Gaussian: positive at every radius, so a threshold on it puts the edge wherever the threshold is put. Q — the excess of rotation over strain — changes sign exactly once, at 1.121 core radii, and that radius is a property of the flow rather than of the person drawing it. Inside it, 71.5 per cent of the circulation.

Flows and fields

Where a vortex stops

Four criteria decide where a vortex ends, and in two dimensions three of them are the same criterion. The fourth is a knob. And the one that is not a knob is not objective: a co-rotating pair of vortices occupies two per cent of a window to one observer and twenty-five to another.

The two ways a shock can meet a wall. Left: the incident shock from the wedge reaches the wall and a second shock turns the flow back parallel to it, meeting at a point. Right: at a larger wedge angle no reflected shock can turn the flow that far, and the intersection lifts off the wall into a triple point with a nearly normal Mach stem standing on the surface and a slip line trailing downstream. The two configurations are drawn at the angles the solver returns, with every shock angle computed rather than sketched.

Compressible flow

When a shock cannot bounce

A shock reflects off a wall until the reflected shock runs out of turning, which happens at a wedge angle well below the free stream's own limit. Between the two boundaries both configurations exist, both are stable, and which one appears depends on which direction the experiment came from.

All themes