Theme

The thread: A smooth picture proves nothing — page 16

Page 16 of 20, continuing through the 172 essays this motif runs through.

172 essays carry this thread — page 16 of 20.

The damping crosses zero once, and the crossing is the boundary. The least damping ratio of the four aeroelastic modes against speed. It falls through zero at 80.843 metres a second, and at that speed the crossing root's real part is four parts in 10¹⁸ — which is what an algebraic condition on a quartic with real coefficients looks like when it is solved numerically. Circulation and lift

The speed where the damping is exactly zero

Flutter is an algebraic condition on a quartic: one root crosses the imaginary axis, at one speed, exactly. And the quantity that locates it is so nearly flat there that the standard way of finding it from flight test overshoots by a quarter.

What the fluid at one height is listening to. The weight the fluid two millimetres above a moving wall gives to the wall's velocity a given delay earlier, in water. It peaks at two thirds of a second and has a tail that falls as the delay to the power minus three halves — so the fluid is responding to a broad stretch of the wall's past rather than to a moment of it. Viscosity

The wall the fluid is listening to

Water two millimetres above a moving wall is responding to what the wall did two thirds of a second ago — most likely. Half of its response is older than four and a half seconds, a tenth is older than two minutes, and the average age of what it is responding to does not exist at all.

Two wakes with one drag. The two initial velocity deficits: a slab, which is roughly what a bluff body leaves, and a pair of separated lobes, which is roughly what a body with a jet through the middle of it leaves. Their integrals are identical, so the two bodies have exactly the same drag. Transition and turbulence

A wake that keeps the drag and forgets the body

Two very different wakes with the same momentum deficit converge to the same profile, because the deficit is conserved and everything else diffuses away. The convergence is a power law rather than an exponential, so it takes two hundred widths for twenty per cent agreement and nine hundred for five.

The curve that lets in more than one answer. The neutral stability curve: the driving needed to sustain a disturbance of a given wavelength. It has a minimum, so at any driving above the minimum there is a whole band of wavelengths that can grow — and the system has to pick one. Regimes and numbers

The state a machine was started into

Above the critical driving there is not one flow but a band of them, and a container of a given size can hold several. Which one appears is decided by how the apparatus was brought up to speed, and at twice critical there are eight to choose from.

One per cent of noise on the image, 1.43 on the axis. The field recovered by onion peeling on 50 rings from one view carrying noise of one per cent of the instrument's own peak reading, from an interferometer's projection and from a schlieren system's deflection, against the true field. On the axis, where the truth is 1, the projection gives 1.431 and the deflection 0.876; over the whole radius their root-mean-square errors are 0.0742 and 0.0219, so the deflection is the quieter route here. Near the edge both are clean, and the error gathers towards the axis — where the field is largest and the flow usually most interesting. What is taught wrongly

One view is enough, and the axis pays for it

An axisymmetric flow — a jet, a plume, a flame — can be reconstructed from a single optical view, because Abel's integral inverts exactly. The inversion runs from the outside in, every error made on the way reaches the axis, and whether it arrives multiplied depends on which instrument took the picture.

Slip follows the stripes more closely than the shear does. Plan views of a striped surface, with the stripes running across each panel, for a shear at 0°, 30°, 54.7° and 90° to them. The faint arrow is the direction of the shear; the dark one is the slip velocity it produces, whose component along the stripes is the along-stripe slip length times the shear and whose component across them is half that. The slip is turned towards the stripes by 0.0°, 13.9°, 19.5° and 0.0°. It is largest, 19.47°, for a shear at 54.74°, where tan θ = √2. A surface with a tensor for a boundary condition can push a flow sideways, which a scalar slip length never can. Flows and fields

Twice as slippery along as across

A surface of alternating gas and solid stripes lets a liquid slip, and a flow far above it sees one number in place of the pattern — but the number depends on which way the flow goes. Along the stripes it is Philip's logarithm; across them it is exactly half, for a reason that takes one substitution to show. And the logarithm means that the slip is bought by the pattern's period rather than by how much of it is gas.

A cone sends 1.7 per cent of its jet's momentum sideways at 15°. A conical divergent section of 15° half-angle and exit area ratio 25, drawn to scale from its throat to its lip, with its virtual apex to the left. The gas leaves as a source flow: straight streamlines from the apex, each at its own angle, and a Mach number uniform on spheres centred there. On the spherical cap through the lip the flow is normal to the surface and uniform, at Mach 3.925 for a gas with γ = 1.2; its axial momentum is ρV² times the cap's projection onto the exit disc, while the mass crossing it is ρV times the cap itself. The ratio of the two areas is (1 + cos α)/2 = 0.9830, and it is the only thing the cone's shape does to the momentum. On the flat exit plane the flow is not uniform: its edge is further from the apex than its centre, and the Mach number there is higher. Compressible flow

The jet a cone sprays sideways

The one-dimensional nozzle sends all its gas straight out along the axis. A real divergent section is a cone, and the gas leaves it as a spray of straight lines from the cone's apex. Only the axial part of that momentum pushes, and the share that does is (1 + cos α)/2 — 98.3 per cent at fifteen degrees, 93.3 at thirty — whatever the gas, the Mach number or the area ratio, and it touches the momentum and never the pressure.

Four solved flows, and the minimum is on the surface in every one. Sampling the whole exterior of each body on a grid and comparing the lowest pressure found there with the lowest found on the surface. The surface wins by a margin that is not marginal — between 0.18 and 0.56 in pressure coefficient — and it wins for a reason rather than by luck: the pressure of an irrotational flow is superharmonic, and a superharmonic function has its minimum on a boundary. Ideal flow

The lowest pressure is on the body

In an ideal flow the minimum pressure is always on a surface — not usually, not for the shapes people draw, always. The proof is an identity about the velocity gradient, and the identity says exactly which flows are exempt.

Two camber lines, one lift and one moment. A NACA 2412 mean line and the same line with a fourth harmonic added to its slope. They are eight tenths of a per cent of the chord apart, which is forty per cent of the section's own camber, and they have the same lift and the same pitching moment at every incidence — to the last bit of double precision. Circulation and lift

Three numbers out of a camber line

Thin-aerofoil theory takes a whole function and returns a lift and a moment. Only three coefficients of that function survive: two camber lines matched in the first three, and eight tenths of a per cent of chord apart, have the same lift and the same moment at every incidence and load distributions thirty-seven per cent apart.

All themes