Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Theme

The thread: A smooth picture proves nothing — page 8

Page 8 of 20, continuing through the 172 essays this motif runs through.

172 essays carry this thread — page 8 of 20.

Most of the fluctuation is the switching. What a hot wire at the edge of a shear layer records, taken apart. The conditional intensity — the fluctuation inside the turbulent fluid — is flat at 0.16 by construction. The measured intensity peaks 20 per cent above it, and the excess is the third curve: the variance of a signal that keeps switching between two mean velocities, which peaks where the switching is most even and is not turbulence at all. A model calibrated against the measured curve is being fitted to an artefact of averaging. Transition and turbulence

Turbulent some of the time

At the edge of a jet or a wake a probe is inside turbulent fluid for part of the time and in perfectly smooth flow for the rest, and an ordinary time average mixes the two. Most of the fluctuation it records there is not turbulence at all — it is the switching between two states, and it peaks where the switching is most even rather than where the turbulence is strongest.

 A sphere does not go at the speed of the flow it is in. How far a force-free sphere on the axis of a round tube lags the fluid at its own centre, against its size. The lag is two-thirds of the square of the size ratio and comes from the reciprocal theorem in one line: the sphere moves at the average of the ambient flow over its own surface, and a parabolic profile is slower everywhere on that surface than at the middle. At a fifth of the tube's radius the lag is 2.7 per cent, which is the difference between a tracer and a thing being measured. Viscosity

A force without the flow that makes it

A sphere carried along by a flow does not travel at the speed of the fluid at its centre. It travels at the average of the flow over its own surface — and getting that result needs no solution of the flow around the sphere at all, only the answer to a completely different problem that everybody already knows.

 The momentum of the fluid, against the shape of the region it is added up over. Momentum of the fluid around a cylinder moving through it, divided by the body's hydrodynamic impulse, against the aspect ratio of the rectangle the integral was taken over. Every rectangle has the same area and contains the same body. A tall region gives minus the impulse, a long one gives plus it, a square gives exactly zero, and the limit of a large region is whichever of those the region was shaped like. The momentum of an unbounded ideal flow is not a number. Ideal flow

The momentum with no value

A cylinder is pushed from rest to a steady speed. Work was done, energy went into the fluid, something was pushed. How much momentum does the fluid carry? The integral converges, the answer is finite, and it is a different finite number for every shape of region it is summed over.

 Ideal flow past a sphere, drawn in a meridional plane. The Stokes stream function of ideal flow past a sphere, contoured at equal intervals. Its relations to the velocity carry factors of r sin θ that the plane stream function does not have, and differencing it reproduces the closed-form velocity to 10⁻¹¹. The surface speed at the equator is exactly one and a half times the free stream, against twice for a circular cylinder: a three-dimensional body lets the flow past in two directions rather than one. Flows and fields

The one number that runs out at three dimensions

A stream function is one function where the velocity is two, and four essays here are built on it. It exists because the divergence vanishes, it is single-valued only if nothing inside is making fluid, and in three dimensions it is not one function at all.

 The exposure lengths that give the true mean, and the ones that do not. How far a finite exposure of a shedding wake lands from the long-exposure mean, against how many shedding periods the shutter was open for. It is exactly zero at every whole number of periods — an average over a complete cycle is the mean, with no error at all — and between the zeros it falls as one over the exposure. Nothing about the picture tells the reader which of these they are looking at. What is taught wrongly

The shutter is part of the answer

Flow photographs are compared as though the exposure were a detail of the camera. It is a term in the measurement: an average over exactly one shedding period returns the true mean to fourteen figures, any other length carries a residue that falls only as one over the exposure, and a two-pulse velocity reading is short by exactly the sinc of the swept angle.

 Elliptic loading rolls up to πb/4, and it is π that puts it there. Three loadings on the same span carrying the same lift, with the rolled-up core positions marked below each. The core sits at the centroid of the shed vorticity, which is a quadrature over the loading and needs nothing about the roll-up itself. Elliptic loading gives πb/8 from the centreline, so the pair ends up 0.7854 of the span apart — the number every wake-separation rule is written against, and one of the few places in this subject where π turns up in an answer an engineer uses directly. The bell rolls up to 0.586 and a nearly rectangular loading to 0.978, because it sheds at the tips. Circulation and lift

Where the wake ends up

The sheet a wing sheds rolls up into two cores within a few spans, and nobody can compute the roll-up cheaply. Nobody has to: what the cores conserve is fixed before they form, and for an elliptically loaded wing the answer contains π and comes out at 78.5 per cent of the span.

 What the phase reaches, and what it does not. The difference between the two records, as a fraction, for five quantities. The variance and the autocorrelation are the same to machine precision because they are the spectrum. A narrow-band linear oscillator answers its own frequency and almost nothing else, so it is nearly phase-blind too. Everything extremal — the crest, the peak drag load, the range of the running integral — is not. What is taught wrongly

The same statistics, and a different load

A wind or wave specification is written as a spectrum, and a spectrum discards the phases. Two records built from one spectrum agree in variance to thirteen figures and in peak drag load by twenty per cent — and with the phases lined up, the same spectrum is a single impulse thirty-one times worse.

 Two velocities, 2.50 apart, and only one of them is anybody's. The velocity in Darcy's law is the flow rate divided by the whole cross-section, solid included: a speed no fluid particle ever has, since the fluid occupies only the fraction ε of that area. The speed the fluid actually averages is larger by exactly 1/ε — 2.50 times here — and it is the one that belongs in a residence time, in a pore Reynolds number and in any statement about when a tracer arrives. The grains are drawn to say that the pore-scale flow is not computed anywhere: no figure on this site claims to resolve it. Fluids at work

A velocity nobody has

The velocity in Darcy's law is the flow rate divided by the whole cross-section, solid included — a speed no fluid particle in the bed ever has. Averaging buys a linear law and charges for it in exactly this coin, and the constant that comes with it is an area of about a square micron.

 Five numbers, one flow, one name. A hyperbolic-tangent shear layer with a matching density profile, measured five ways, each of which appears in the literature as "the Richardson number". The minimum gradient value is what Miles' and Howard's theorem is about and is the only one the quarter belongs to. The bulk numbers depend on which thickness and which velocity difference were used; the depth-averaged one depends on how far from the layer the measurement extended, and grows without limit as it extends further. Transition and turbulence

Five numbers, one name

The Richardson number has a threshold at a quarter, and the quarter belongs to one of the five quantities that go by the name. On a single tanh shear layer they run from J to seventeen J, and the largest of them grows without limit as the measurement is extended further from the layer.

All themes