Concept

Angle of attack — where it appears

The angle between a wing's chord line and the air approaching it. It is what a wing responds to and what a wing stalls at, and the speed at which an aircraft reaches a given one depends on its weight, its altitude and its load factor.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

The left wall is not a speed, it is an angle drawn in speed coordinates. The V–n diagram: every combination of speed and load factor the aircraft can reach. The curved left boundary is the wing at its stalling angle — n = ½ρV²S C_Lmax /W, a parabola — and it is the same limit at every point along it. The flat top and bottom are the structure. Where the two meet is the corner speed, 56.6 metres per second here: the slowest speed at which the aircraft can reach its limit load factor, and therefore the speed at which it turns hardest. Above it the wing can pull more than the structure allows — at the never-exceed speed it could reach 9.6g before stalling — and the pilot's limit stops being the air.

An angle, not a speed

The number is printed in the handbook, marked in white on the airspeed indicator and used in every briefing, and the wing has no way of knowing it. A wing stalls at an angle. The speed at which an aeroplane reaches that angle is an answer with four other variables in it, and every one of them moves.

misconceptions · Stall speed

One sign change, and both of a stall's surprises follow from it. A lift curve with a peak, and the rolling moment a wing makes against its own roll at the same incidence. Below the peak the slope of the lift curve is positive, the down-going wing makes more lift, and the roll is opposed. Past the peak the slope is negative, the down-going wing makes less, and the roll is reinforced. The stalling angle here is 16.46° and the damping changes sign at 17.07°. Nothing in this picture is a spin yet — a spin needs yaw as well — but the engine that drives one is the crossing of that line.

A roll that feeds itself

A spin is routinely described as a stall that got worse, and it is not a stall at all in the sense of an angle rather than a speed. It is autorotation — a roll that sustains itself because past the peak of the lift curve the down-going wing makes less lift rather than more — and the arithmetic says it begins a little past the stalling angle rather than at it.

misconceptions · Stall speed

A high tail buys a second trim point, at 31.52 degrees. The pitching moment of two layouts against incidence, with the stable trim points marked. Both cross zero with a negative slope near 0.76°, which is the ordinary cruise trim. Past the stall the conventional layout's tail is caught only glancingly by the wake and its moment stays nose-down, so it has no second crossing; the T-tail's tail is swept into the wake and sees 12 per cent of the dynamic pressure, its download collapses, and the wing's own nose-up moment carries the curve back across zero at 31.52°. That second crossing is stable — the slope there is negative too — which means an aircraft that reaches it stays there.

A stall that is a place

A stall is an event, and the usual accounts treat it as one — a boundary reached, a damping lost. A high tailplane makes it something else. Swept into the wing's wake, the tail loses the download that held the nose up, and the aircraft finds a second stable trim point thirty degrees past the stall from which the elevator cannot bring it back.

misconceptions · Stall speed

Named alongside it

The objects these essays reach for when they reach for this one.

Lift coefficient Model limit Separation Stall Misconception Airspeed indicator Autorotation Corner speed Downwash Dynamic pressure Equilibrium Flight envelope

All concepts