Concept

Misconception — where it appears

An explanation that is widely taught, plausible and false. This collection treats them as first-class content, stating each fairly and then testing it against a computation, because a reader who has been misinformed has a harder problem than one who is ignorant.

Named by 38 essays across 4 fields — each of them below, with the objects they name alongside it.

Two parcels released together do not arrive together. The most repeated explanation of lift says that air parting at the leading edge must meet again at the trailing edge, so the longer upper path forces a higher speed. Released into the solved field, the upper parcel arrives long before the lower one — the premise is simply false, and the real speed difference is larger than it would require.

The story about air meeting up again

The most repeated explanation of lift says that air parting at the nose must rejoin at the tail, so the longer upper path forces a higher speed. The premise is false, and the speed it predicts is wrong by a factor of twenty.

misconceptions · Equal transit

The lift curve that made flight look impossible. Lift coefficient against incidence, by Newton's impact theory and by thin-aerofoil theory. One is quadratic in the angle and the other linear, so at small incidence — which is where aircraft fly — they differ by more than an order of magnitude. Newton's version says a wing large enough to carry a man would need an engine nobody could build, and for a century that arithmetic was taken as settling the question.

The theory that forbade flight

Newton treated air as a hail of particles that give up their normal momentum on impact, and got a lift coefficient of 2sin²α cos α. At five degrees that is a thirty-sixth of what a wing actually makes, and the quadratic is why powered flight looked arithmetically impossible for two centuries. The same formula is exact at Mach twenty.

misconceptions · Newtonian

What a barometer on the wing would read at 60 m/s. The absolute pressure along an aerofoil's surface, in kilopascals, with the atmosphere put back. Nothing on the wing is near zero: the deepest point of the so-called suction peak is a few per cent below a hundred kilopascals, and the air there is still pushing on the wing hard enough to hold up a column of itself eight kilometres tall. The lift is the difference between two large pushes, not a pull.

Nothing sucks

The upper surface of a wing is universally described as being under suction, which sounds like a pull. A fluid cannot pull. The lowest absolute pressure on a wing at sixty metres a second is 96 kilopascals — a five per cent dip in a hundred — and the force does not depend on where zero was put, because the normals of a closed body sum to nothing.

misconceptions · Suction

The effect that explains nothing

A jet follows a curved wall and the wall feels a suction. Both are real, both are famous, and naming them after Coandă explains neither — what is happening is the normal component of Euler's equation, and it holds on every curved streamline in every flow.

misconceptions · Coanda

Two sides of one ball, at different pressures. The surface pressure coefficient round a ball, measured from the front stagnation point, on the side the seam trips and on the side it does not. Up to separation both follow the exact potential-flow distribution 1 − (9/4)sin²θ. After it both take the same wake pressure, which is what a manometer measures rather than what the ideal theory predicts. The asymmetry is the shaded area between them, and integrating it gives a side force of 0.2949 towards the later-separating side.

A ball that swings without spinning

A cricket ball curves in flight with no spin about any useful axis. The mechanism is not the Magnus effect; it is a seam tripping the boundary layer on one side so that side lets go later. Which way the ball then goes depends on one borrowed number, and this site's own inviscid solver supplies the value that gets it wrong.

applied · Sport ball

The bath is ten thousand times too small. The Rossby number — the ratio of the inertial term to the Coriolis term in the momentum equation — for eight flows at 45 degrees, on a logarithmic axis. Above one, rotation is a correction; below one, it is the physics. A draining bath sits at 3.2e+3 and a mid-latitude depression at 1.9e-1. The Coriolis term is not absent from the bath: it is present, computable, and four orders of magnitude smaller than the terms that decide what happens. Saying so is not the same as saying it is zero.

The bath does not know the hemisphere

The Coriolis term in a draining bath is not absent. It is present, computable, and about four hundred times smaller than what a hand left in the water an hour ago is still doing — which is a ratio rather than an opinion, and it is the same kind of argument as a Reynolds number.

misconceptions · Coriolis scale

Two heights, and only one of them is in the answer. A siphon, with the two heights that get confused. The drop from the source surface to the outlet is what drives the flow: the exit speed is √(2gΔz) = 4.43 m/s and nothing else enters it. The rise to the crown decides the pressure at the top — 72.0 kPa absolute here, against an atmosphere of 101.3 — and therefore whether the column holds together at all. A siphon over a high wall and one over a kerb, draining to the same place, flow at exactly the same rate.

The siphon that does not need the air

A siphon is explained everywhere by the atmosphere pushing the liquid over the hump. The flow rate says otherwise, in the flattest way available — the height of the hump does not appear in it at all. What the atmosphere does is hold the column together, which is a different job with a different limit.

misconceptions · Siphon $What the ground actually gives a wing. Induced drag near the ground as a fraction of the same wing's in free air, against height in spans, at constant lift. The ground is a plane of symmetry, so the wake is joined by a mirrored wake of opposite circulation below it, and the upwash from that image is what takes the drag away. At a tenth of a span the wing keeps 0.516 of its induced drag — a saving of 48 per cent — and by a span and a half the effect is 1.3 per cent and going. The lift is held fixed all the way along this curve: what the ground gives here is not more lift, it is the same lift for less drag, and the two are different claims about a landing aeroplane.$

The cushion that is not there

Ground effect is usually explained as air trapped under the wing and compressed into a cushion. At the heights an aeroplane actually flies at, the air under the wing is moving at four fifths of flight speed and most of what the ground gives is a drag saving the story never mentions.

misconceptions · Ground cushion

The air a wing does not carry

No slip says the air touching a surface moves with it, and the usual reading is that a wing drags a blanket of air along. The blanket is 1.7 millimetres thick per metre of chord, it is different air every instant, and the drag it costs falls as it gets thicker.

misconceptions · The no-slip condition

An hour for every tenfold

Turbulence is deterministic and unpredictable, and the exchange rate between those two is exact: measuring the initial state ten times better buys the same extra forecast time every time, for ever. A constant, and it belongs to the flow rather than to the instrument.

misconceptions · Randomness

Three accounts of lift, one of them tuned to be exactly right at five degrees. Thin-aerofoil theory, which is the answer; Newtonian impact theory with its constant tuned so that it passes exactly through the truth at five degrees; and the equal-transit story, which has no free constant and sits along the bottom. At the tuning point the tuned model and the truth are indistinguishable, and no measurement there separates them.

A right total from a wrong picture

Newtonian impact theory has a free constant in it. Tuned at five degrees it reproduces a NACA 2412's lift exactly, and no measurement at five degrees can tell it from the truth. What separates them is the derivative — a lift-curve slope 2.8 times too steep — which is a second constraint rather than a better one.

misconceptions · Momentum lift

The effect that is real, and where it stops

The Coandă effect has a genuine mechanism, and it is the same equation that makes the suction on a wing. What separates the two is where the integral comes from: a wall jet generates all of its pressure deficit inside a layer two per cent of the radius thick, and a cylinder in a stream needs a third of a radius for half of it.

misconceptions · Coanda

One sheared stream, and the total pressure across it. A parallel shear flow is an exact steady solution of the Euler equations, and the momentum equation requires its static pressure to be uniform. So the total pressure is entirely the dynamic pressure, which varies with the speed — by three and a fifth dynamic heads across this layer, on a flow where the static pressure does not vary at all.

Four Bernoullis and one name

"Bernoulli's equation" names at least four statements with four different constants, three domains of validity and one shared reputation for being misapplied. A single sheared stream separates the first three: its total pressure is constant along every streamline, varies by three dynamic heads across them, and its static pressure never moves at all.

misconceptions · Bernoulli's equation

Four sections, and what the shape story says about each. A flat plate, a symmetric section twelve per cent thick, a cambered one, and a section with a wavy upper skin. The first two have upper and lower surfaces of exactly equal length; the last has an upper surface two and a half per cent longer than its lower one, which is twice the cambered section's excess.

The wing that is flat, and flies

Refuting the equal-transit story by computing the parcels leaves its premise standing, and the premise is the part most readers believe: that the shape is what makes the lift. It is a claim about shapes, so it is tested with shapes — a flat plate, a symmetric section, and a cambered one flown upside down.

misconceptions · Equal transit

The one calculation in which the atmosphere really does push. How high a partial vacuum inside the tube will raise the liquid, against the absolute pressure achieved inside it. The lift is (p_atm − p_inside)/ρg and it is capped at the barometric height of 10.11 m, because below the vapour pressure the liquid boils and pulling harder buys nothing. The horizontal lines are five crown heights: a crown below a line's intersection with the curve can be primed by suction and one above it cannot, at any pump. This is the process the running siphon's argument explicitly excluded, and it is the one where the atmospheric account is the mechanism rather than a limit.

The one place the atmosphere pushes

The height of a siphon's hump is not in its flow rate, and the atmosphere holds the column together rather than driving it. That account excludes one process by name — starting. That is the process the atmospheric account describes correctly, and it is the only one in the whole device.

misconceptions · Siphon

The source falls 6 m and the crown pressure does not move. The pressure at the crown of a draining siphon, against time, as the source level falls from the top of the tank to the end of the run, a drop of 6 m. It is flat to 1.5e-11 pascals — not nearly flat, exactly flat, because the two effects of a falling source cancel identically. Losing a metre of level shrinks the drop, which slows the flow and raises the crown pressure by half a velocity head; and it grows the rise, which lowers the crown pressure by ρg per metre. Those are the same number. So a siphon that starts will not break as it drains, however far the level falls, and the run ended because the level reached the outlet instead.

The siphon that does not break

A draining reservoir shrinks the drop and grows the rise at the same time, and the siphon's own coupling — a metre of extra drop costs a metre of hump — says a siphon should break as it empties. It does not. The two effects cancel exactly, and the crown pressure of a draining siphon is a constant that does not contain the source level at all.

misconceptions · Siphon

One sign change, and both of a stall's surprises follow from it. A lift curve with a peak, and the rolling moment a wing makes against its own roll at the same incidence. Below the peak the slope of the lift curve is positive, the down-going wing makes more lift, and the roll is opposed. Past the peak the slope is negative, the down-going wing makes less, and the roll is reinforced. The stalling angle here is 16.46° and the damping changes sign at 17.07°. Nothing in this picture is a spin yet — a spin needs yaw as well — but the engine that drives one is the crossing of that line.

A roll that feeds itself

A spin is routinely described as a stall that got worse, and it is not a stall at all in the sense of an angle rather than a speed. It is autorotation — a roll that sustains itself because past the peak of the lift curve the down-going wing makes less lift rather than more — and the arithmetic says it begins a little past the stalling angle rather than at it.

misconceptions · Stall speed

A high tail buys a second trim point, at 31.52 degrees. The pitching moment of two layouts against incidence, with the stable trim points marked. Both cross zero with a negative slope near 0.76°, which is the ordinary cruise trim. Past the stall the conventional layout's tail is caught only glancingly by the wake and its moment stays nose-down, so it has no second crossing; the T-tail's tail is swept into the wake and sees 12 per cent of the dynamic pressure, its download collapses, and the wing's own nose-up moment carries the curve back across zero at 31.52°. That second crossing is stable — the slope there is negative too — which means an aircraft that reaches it stays there.

A stall that is a place

A stall is an event, and the usual accounts treat it as one — a boundary reached, a damping lost. A high tailplane makes it something else. Swept into the wing's wake, the tail loses the download that held the nose up, and the aircraft finds a second stable trim point thirty degrees past the stall from which the elevator cannot bring it back.

misconceptions · Stall speed

Identical lift at every altitude, and the skin load nearly doubles. The same wing at the same dynamic pressure at seven altitudes. The lift is identical at every one of them — the flat line, computed from the absolute pressures rather than assumed, because a net force cannot depend on where the pressure datum is set. The load on a vented panel is identical too, at 4.86 kPa, because both sides of it moved together. The load on a sealed panel with 75.26 kPa inside is not: it is 28.27 kPa at sea level and 60.84 kPa at twelve kilometres. The datum cancelled in the force and it is one of the two numbers in the stress.

A force forgets the datum, a stress cannot

Nothing sucks, because the pressure datum cancels — the normals of a closed body sum to nothing, so the lift is the same in gauge or absolute pressure. That identity is about a resultant, and it is routinely carried one step too far. The load on a panel of skin has the ambient in it as one of two numbers, not as a datum.

misconceptions · Suction

Four bodies, four drag coefficients, and no flow was solved. Four bodies with their Newtonian drag coefficients, each computed as a quadrature over its own surface with no flow solution anywhere. The cone's answer is exactly 2sin²δ, checked against the closed form to nine decimal places; the flat disc's is exactly 2, since every element of it faces the stream; and the sphere's is 1 against the classical Newtonian value of 1. Every one of those is an integral of one expression over a shape, and none of them required knowing what the air was doing anywhere.

The only theory simple enough to optimise

Whether Newton's sine-squared law is right has two answers — hopeless at the speeds he argued about, nearly exact behind a strong shock. This asks a different question about the same formula. Its pressure depends only on the local surface angle, so a shape's drag is a quadrature rather than a solution, and the best shape can be found by calculus.

misconceptions · Newtonian

Two integrands, and the wrong one claims 9.58 per cent more drag. The two things that get integrated across a wake, each scaled to its own peak so the shapes can be compared. The momentum integrand u(U − u)/U² is the drag; the mass integrand (U − u)/U is the displacement thickness, and it is not a drag at all. They differ by a factor of u/U inside them, so the mass one is fatter wherever the deficit is deep — and its integral here is 1.1 times the momentum one's. That ratio is decided by how deep the wake is rather than by how wide: at a twentieth of this momentum thickness it falls to 1, and at twice it rises to 1.25. The error is smallest exactly where a survey is properly done, far downstream where the wake has spread and shallowed.

Weighing what is missing

A control volume drawn round a wing gets the lift out of it, on a flow that was solved exactly. The wake survey asks the same box for the drag on a flow nobody has solved, and it is how a real aerofoil's drag is known — with three assumptions, all of which are checkable, and one integral standing next to it that is wrong.

misconceptions · Momentum lift

The one term in ground effect that really is about carried air. The added mass of a plate approaching a plane, as a multiple of its free-air value. In free air a plate borrows ρπc²/4 per unit span — exactly 0.79 for a unit chord in unit density, which is the mass of the circle its chord spans. Near a wall the fluid in the gap must leave sideways through a narrowing passage, so it moves faster than it would in the open and carries more energy: the borrowed mass grows as the inverse of the gap and diverges as the gap closes. At half a chord it is 1.21 times, at a tenth 2.06, at a twentieth 3.12. This is a cushion in the ordinary sense — fluid that has to be got out of the way and resists being — and it is the term the steady argument has none of.

The cushion that is there after all

A wing near the ground makes more lift for reasons that have no cushion in them, and that account cannot reach two cases — a wing descending, and a rotor in the hover, where there is no steady flight for the image-vortex account to be about. Those cases have a term that really is about carried air, and it grows without limit as the gap closes.

misconceptions · Ground cushion $Three instruments, three derivatives, one field. A density field — a shock, smoothed to its own thickness — and what each of the three optical techniques records across it, each scaled to its own peak so the shapes can be compared. Interferometry follows the density itself; schlieren follows its first derivative and peaks where the density is changing fastest; shadowgraph follows the second and is a light-and-dark pair straddling the same place. None of them is looking at the flow: the refractive index of a gas is linear in its density, so every one of them is a densitometer and the differences between them are differences of calculus rather than of apparatus.$

An instrument that takes a derivative

Dye, smoke and seeded particles mark the fluid and read the marks. The optical ones mark nothing — light passes through and is bent — and what a plate records is not the flow but a derivative of its density. Two of the three are therefore exactly blind to a uniform stream, at any speed it happens to have.

misconceptions · Visualisation

A degree of temperature is worth 0.34 per cent of pressure. The error in the pressure a paint reports, against how much warmer the surface is at the test condition than at the reference, at four pressures. At 0.8 of the reference pressure the sensitivity is -0.34 per cent of pressure per kelvin, so 10 degrees is -3.45 per cent. That is not a small number against what the technique is used to measure, and a model's surface temperature is not uniform: it is warmer where the flow has been brought to rest and cooler where it has accelerated, which means the temperature error is largest exactly where the pressure gradients are. The standard remedy is a second, temperature-sensitive paint measured at the same time — an instrument added to correct an instrument.

The paint that measures the wrong field

Dye, seeded particles and the optical methods all look through the flow or at something put in it. Pressure-sensitive paint looks at the surface, reports a scalar rather than a derivative, and turns a row of taps into a field. What quenches its luminescence is oxygen, which is what makes it a pressure gauge — and temperature, which is the other field a flow is guaranteed to produce.

misconceptions · Visualisation

100 metres of water, −1.98 MPa absolute at the top. The absolute pressure up a transpiring column 100 metres tall, with the sap rising at 0.25 mm/s through conduits 40 µm across. It starts at 1.3 kPa at the root, falls by 9.79 kPa a metre for gravity and 10.02 for friction, and reaches −1.98 MPa at the top — below zero, which is not a low push but a pull. The pale line is the same column with nothing flowing. The floor is not the vapour pressure but the pore a gas bubble could be drawn through: −2.81 MPa for a 50 nm pore, which this column would reach at 142 metres. A suction pump lifting the same water from a free surface stops at 10.1 metres, because it offers the water somewhere to boil.

Where a liquid does pull

A fluid cannot pull, and the essays that settle what suction is are right about every gas and every liquid with a free surface near it. A liquid with nothing in it to boil on is another matter. Every tree taller than ten metres depends on the difference, and the floor under it is set by the size of a pore rather than by the vapour pressure.

misconceptions · Suction

A tube 10 cm across, spun: the lowest pressure is on the axis. The absolute pressure along a water-filled tube spun about its middle, open to the air at both ends, 5 cm from the axis. In the spinning frame the water is at rest under a centrifugal pull, so the pressure falls from atmospheric at each meniscus to its lowest on the axis, as a parabola. 10 thousand rpm puts −1.3 MPa there, 20 thousand rpm puts −5.4 MPa there, 30 thousand rpm puts −12.2 MPa there and 45 thousand rpm puts −27.6 MPa there. The place the water is stretched hardest is the place furthest from both free surfaces, which is the whole merit of the method: a gas cannot reach the liquid where it is weakest.

A breaking strength that is the size of a flaw

Water can be stretched, and how far is a measurement people have made for a century and a half with instruments that agree with one another and not with the theory. Spinning a tube puts the stretch where no gas can reach it, sealing one caps the stretch at water's density maximum, and every measured number turns out to name the size of the worst cavity in the sample.

misconceptions · Suction

Friction lends the crown 28.4 kPa, and the tank takes it back. The absolute pressure at the crown of a siphon with friction in its hose, through a whole drain, for the crown placed at three positions along the hose, against the frictionless constant of 23.01 kPa. With the crown 0.3 of the way it starts at 63.3 kPa, with the crown 0.5 along it starts at 51.5 kPa and with the crown 0.7 of the way it starts at 40.4 kPa. Every curve is above the constant, every curve falls towards it as the level falls, and every curve reaches it at the end — 23.06 kPa with a centimetre of level left. Friction never brings a siphon nearer to breaking; it lends a margin, and the draining tank returns it pascal by pascal, so the worst the crown ever sees is the frictionless value.

The margin friction lends a siphon

Without friction a draining siphon's crown pressure does not depend on the source level at all, and every real hose has friction. It turns out always to raise the crown pressure, by an amount the draining tank hands back pascal by pascal — and how much it lends is decided by where along the hose the crown sits, not by how rough or how narrow the hose is.

misconceptions · Siphon

A litre of water at the crown carries 77 mL of gas it cannot hold. The volume of free gas a litre of air-saturated water can release at a siphon's crown, at the crown's own pressure, against that pressure, on a logarithmic scale, at three temperatures. It is zero at atmospheric and grows without limit towards the vapour pressure. At the reference siphon's starting crown pressure of 51.5 kPa it is 20.6 mL, a supersaturation of 2.02; at the frictionless floor of 23.0 kPa it is 76.7 mL, a supersaturation of 4.79. Cold water carries more: 87.4 mL at 5 °C. This is the equilibrium bound — what would come out if the water stayed long enough, which it does not.

The air that breaks a siphon nothing else can

A running siphon's heights cannot break it, and its friction only postpones the moment it is most exposed. What does break a siphon that has run for a day is the air dissolved in its water, which the crown's low pressure leaves the water carrying far more of than it can hold — and which gathers only once the flow is too slow to carry a bubble away.

misconceptions · Siphon

The cushion changes its physics 0.36 mm from the ground. The two forces on a plate 10 cm across closing on a plane at 1 m/s in air at 20 °C, per metre of span, against the gap on logarithmic axes. The viscous squeeze film, Reynolds' lubrication result μVc³/h³, rises as the cube of the closeness; the inertial one, ρV²c³/24h² from the potential flow's added mass, as the square. They are equal where the gap Reynolds number ρVh/μ is exactly 24, at 0.361 mm, where each is 3.84e+2 N/m. Above that gap the cushion is the fluid's inertia and below it the fluid's viscosity — and at the crossover neither formula is accurate, since it is where one limit hands over to the other rather than a solution of the flow between them.

A cushion that changes its physics

A plate closing on a plane is resisted by the fluid it has to squeeze out, and the resistance is two different forces with two different laws — one from the fluid's inertia and one from its viscosity. They hand over at a gap of twenty-four kinematic viscosities per unit of closing speed, which for a wing in air is a third of a millimetre, and the two films disagree about whether the plate ever lands at all.

misconceptions · Ground cushion

The same data, in a basis the theorem allows just as much. The identical two hundred and forty points, plotted as F/(mu U d) — which is the drag coefficient times the Reynolds number, a perfectly legitimate pi group forming a complete pair with the abscissa. The result is a straight line of slope 0.9985 through five decades with an r-squared of 0.9985, and it contains no physics: the ordinate contains the abscissa.

The groups are not the only groups

Buckingham's theorem fixes how many dimensionless groups an answer can depend on and says nothing about which. Two of the infinitely many legitimate choices are used here on the same data: one manufactures a straight line through five decades out of a constant, and the other erases Stokes' law completely.

regimes · Dimensional

The stress a pipe knows

A capillary viscometer measures a pressure drop and a flow rate and reports a viscosity. The first half of that inference is a force balance and is exact for any fluid there is; the second needs the slope of a whole flow curve, which is the experiment the instrument was bought to avoid.

viscous · Non-newtonian

The same plate borrows more near a wall and less near a free surface. The added mass of a plate closing broadside on a boundary, as a multiple of its free-air value, against the gap in chords on a logarithmic axis, for a solid wall and for a boundary held at constant pressure — a free surface struck quickly, or the edge of an open jet. At a tenth of a chord the wall gives 1.966 and the free boundary 0.677; at 0.035 chords 3.97 and 0.584. The wall's value grows without limit as the gap closes, because the fluid in the gap has to be squeezed out. The free boundary's falls towards exactly one half, because a plate lying on a free surface sets in motion only the half-space below it. Same plate, same fluid, same speed — the boundary decides the sign, through the one thing it is allowed to tell the flow.

The borrowed mass the boundary decides

A body accelerating near a solid wall has to squeeze out the fluid between them, and borrows more mass than it would in the open. The same body accelerating near a free surface, or inside an open-jet wind tunnel, borrows less. The fluid, the body and the speed are identical, and what reverses the answer is the one thing each boundary is allowed to tell the flow.

misconceptions · Ground cushion

A window one core wide reads the vortex 7.5 per cent slow. The tangential velocity across a Lamb–Oseen vortex, in units of its core radius and of Γ/2π divided by it, as it is and as particle image velocimetry reports it with square interrogation windows of three widths — the average of the velocity over each window, which is what a correlation over the window returns to first order. The true peak is 0.6382 at 1.1209 core radii. A window 0.5 core radii wide reports 98.0 per cent of it, 1.021 times as far out, a window 1 core radii wide reports 92.5 per cent of it, 1.084 times as far out and a window 2 core radii wide reports 77.1 per cent of it, 1.334 times as far out. The instrument that measures velocity directly still reports a slower, fatter vortex than the one there, by an amount set entirely by the window against the core.

The window every vector is averaged over

Particle image velocimetry is the one flow-visualisation technique that reports the velocity itself, and it still applies an operator: every vector is an average over an interrogation window. A window is a filter with a transfer function, and it makes a vortex slower and fatter, a thin shear layer exactly as thick as the window, and some features smaller than the window point the wrong way.

misconceptions · Visualisation

One per cent of noise on the image, 1.43 on the axis. The field recovered by onion peeling on 50 rings from one view carrying noise of one per cent of the instrument's own peak reading, from an interferometer's projection and from a schlieren system's deflection, against the true field. On the axis, where the truth is 1, the projection gives 1.431 and the deflection 0.876; over the whole radius their root-mean-square errors are 0.0742 and 0.0219, so the deflection is the quieter route here. Near the edge both are clean, and the error gathers towards the axis — where the field is largest and the flow usually most interesting.

One view is enough, and the axis pays for it

An axisymmetric flow — a jet, a plume, a flame — can be reconstructed from a single optical view, because Abel's integral inverts exactly. The inversion runs from the outside in, every error made on the way reaches the axis, and whether it arrives multiplied depends on which instrument took the picture.

misconceptions · Visualisation

A water sheet two millimetres thick leaves the lip above 0.270 m/s. The effective tension of a sheet of water, 2σ − ρU²h per metre of its width, against the speed it is poured at, for sheets one, two and four millimetres thick. At rest every sheet carries the tension of its two surfaces, 145.4 mN/m, and the momentum it carries along itself subtracts from that. A 1 mm sheet reaches zero at 0.382 m/s, a 2 mm sheet reaches zero at 0.270 m/s and a 4 mm sheet reaches zero at 0.191 m/s. Below its own crossing a sheet bent round a lip is pulled onto it; above, it is flung off. The quantity that decides is a tension, not a pressure, and the speed at which it vanishes is the speed of waves along the sheet.

The teapot effect is a tension, not a pressure

A slow pour runs back under a spout and down its outside, and the name it is usually given is the Coandă effect. The Coandă effect borrows the ambient pressure, and a liquid in air has none to borrow. A liquid sheet is held to a lip by its own surface tension, and it lets go at the one speed that tension cannot carry — the speed of waves along the sheet — whatever the lip's radius.

misconceptions · Coanda $The shaded face's share of the force is set by K, and it is not small until K is. The fraction of a flat plate's normal force carried by its leeward face against K = M sin α, at Mach 3, 5, 10, 20, with the hypersonic small-disturbance value and the share the leeward face would have at vacuum (dashed). Newtonian theory puts it at zero. The curves collapse on K: the small-disturbance share is 35.7 per cent at K = 0.5, 24.2 at 1, 11.2 at 2 and 3.4 at 4, and the vacuum bound is 28.8, 11.4 and 3.4 per cent at 1, 2 and 4. The zero is a good approximation only where K is large — which is also the only place the Newtonian windward pressure is itself accurate.$

The face Newton left in shadow

Newtonian theory gives a surface turned away from the stream a pressure coefficient of exactly zero, and at hypersonic speed the rest of the theory is nearly right. The shaded face is not. Computed exactly on a flat plate, its share of the force depends on the similarity parameter K = M sin α rather than on the Mach number, it is a quarter of the force at K = 1, and it moves a hypersonic plate's best lift-to-drag ratio from 5 to 7 at Mach 10.

misconceptions · Newtonian

The spot a local theory cannot see

Newtonian theory gives every panel of a hypersonic vehicle a pressure set by its own angle to the stream, and no panel more than the stagnation pressure behind a normal shock. Let a shock from one part cross the bow shock of another and a supersonic jet forms that reaches the surface through weaker shocks. At Mach 8 it stagnates at 8.6 times the ceiling — and the worst amplification at every Mach number is close to the Mach number itself.

misconceptions · Newtonian

The part of a field 4 cameras cannot see. Middle, a field with no symmetry on a 16 × 16 grid. Left, the part of it that projects to exactly nothing in every one of 4 views, shaded one way above zero and the other below: a pattern of streaks and hollows that cancels along every ray. Right, the field with that part taken away. The middle and right fields give identical pictures in all 4 views, to 2e-13 of the largest ray, and no reconstruction from those views can tell them apart. The invisible part is one combination of 177 independent patterns the views cannot see.

Four cameras and a field they cannot see

An axisymmetric flow can be rebuilt from one photograph because its symmetry supplies every other view. A flow without an axis has to be photographed from several directions, and a few directions do not merely give a noisy answer — they leave whole patterns of density that every camera records as nothing. Four views of a 16 × 16 field see 79 of its 256 independent patterns and are exactly blind to the rest.

misconceptions · Visualisation

Named alongside it

The objects these essays reach for when they reach for this one.

Model limit Measurement Absolute pressure Pressure coefficient Vapour pressure Cavitation Lift coefficient Instrument Potential flow Suction Barometric height Bernoulli's equation

All concepts