Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Concept

Minimum-drag speed — where it appears

The speed at which a wing's induced and profile drags are equal, which is where the total is least. Flying slower or faster costs more, and the speed for least power is a further factor below it.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

A wing's two drags, and the lift at which they are equal. Friction drag and induced drag plotted against lift coefficient, with their sum above them. Friction is flat, because a surface costs the same whatever the wing is doing; induced drag rises as the square of the lift. The total is least where the two are equal, and that is also the point of best glide.

The two drags a wing pays

A wing pays for having a surface, and it pays for making lift with a finite span. One of those bills falls as it flies faster and the other rises, so there is a speed at which the total is least — and the condition for it turns out to be that the two are equal.

viscous · Drag budget The speed for least drag is not the speed for least power. Drag and power against airspeed, in units of the speed at which drag is least. Power is drag times speed, so its minimum sits slower — at the fourth root of a third of the least-drag speed, which is 0.76 of it. Flying for range and flying for endurance are therefore different speeds, and the difference is not a rule of thumb.

The cheapest way to stay up

There is a speed at which an aircraft's drag is least, and a different, slower speed at which its power is least. The ratio between them is the fourth root of a third — a number that does not depend on the aircraft, the altitude, or anything else about the flight.

viscous · Drag budget Four bodies of identical length and volume, and their wave drags. Each body has the same length and the same volume; only the distribution of area along it differs. The Sears–Haack body — the spindle whose area goes as the three-halves power of x(L−x) — has the least wave drag of the four, and every other shape pays between thirty-seven per cent and a hundred and seventy-five per cent more for carrying the same volume the same distance. Nothing about the cross-sections' shape enters: only the area distribution does.

The least drag a volume can have

A body's supersonic wave drag depends on nothing about it except how its cross-sectional area is distributed along its length. Minimising that for a given volume gives one shape — and the answer goes as the volume squared over the fourth power of the length.

compressible · Wave drag

Named alongside it

The objects these essays reach for when they reach for this one.

DragDrag polarGlide ratioInduced dragSkin frictionArea ruleBlasiusConstraintLifting lineModel limitMomentumNon dimensionalisation

All concepts