Concept

The θ–β–M relation — where it appears

The relation between the turn angle, the shock angle and the Mach number for an oblique shock. It has two solutions for every turn, a maximum turn past which no attached shock exists, and it is solved rather than tabulated in this collection.

Named by 4 essays across one field — each of them below, with the objects they name alongside it.

A 10° wedge at Mach 2.00 has two shocks that solve it. The wedge turns the flow through a fixed angle, and the θ–β–M relation offers two shock angles that achieve it. The weak solution, drawn steeply forward, leaves the flow supersonic and is what a wedge in a free stream produces. The strong solution leaves it subsonic and appears where downstream pressure forces it. Nothing local to the wedge chooses between them.

A shock that leans

Tilt a shock and only the velocity component across it is changed — the component along it passes through untouched. That single observation turns every oblique shock into a normal shock in disguise, and it is why a wedge at Mach 2 leaves the flow supersonic while a blunt nose does not.

compressible · Oblique shock

Past 23.0° at Mach 2.00 there is no attached shock. The same wedge at two half-angles. On the left the θ–β–M relation has a root and the shock sits on the nose. On the right it has none, and the solver throws rather than returning the nearest thing — which matters, because a solver that quietly clamped to the maximum would draw a neat attached shock on a body that cannot carry one. The bow shock on the right is indicative: its shape is not solved here.

When the wedge is too blunt

Every curve of shock angle against deflection has a maximum. Past it there is no attached shock at any angle — the solver has no root to return and must say so, rather than quietly handing back the nearest thing and drawing a picture that cannot exist.

compressible · Oblique shock

The two ways a shock can meet a wall. Left: the incident shock from the wedge reaches the wall and a second shock turns the flow back parallel to it, meeting at a point. Right: at a larger wedge angle no reflected shock can turn the flow that far, and the intersection lifts off the wall into a triple point with a nearly normal Mach stem standing on the surface and a slip line trailing downstream. The two configurations are drawn at the angles the solver returns, with every shock angle computed rather than sketched.

When a shock cannot bounce

A shock reflects off a wall until the reflected shock runs out of turning, which happens at a wedge angle well below the free stream's own limit. Between the two boundaries both configurations exist, both are stable, and which one appears depends on which direction the experiment came from.

compressible · Mach reflection

A 20° cone at Mach 2: the shock at 37.80°, and a flow still compressing behind it. The conical flow round a cone of 20° half-angle at Mach 2, from the Taylor–Maccoll equation. The shock sits at 37.80° from the axis and turns the flow crossing it through only 8.57°, leaving it at Mach 1.693. Between the shock and the surface every ray from the apex carries its own state: the Mach number falls from 1.693 just behind the shock to 1.568 at the surface and the pressure rises from 1.586 to 1.912 times the free stream's — the rest of the turn, made without a shock. Nothing depends on the distance from the apex, so the rays are lines of constant state.

A cone finishes its turn after the shock

A wedge turns a supersonic stream all at once, at its shock. A cone of the same angle does not: its shock turns the flow only part of the way and leaves the rest to a smooth compression between the shock and the surface. Solved from Taylor and Maccoll's equation, the cone's shock is weaker, keeps more of the total pressure, carries less than half the wedge's surface pressure, and stays attached to 40.7° at Mach 2 where the wedge gives up at 23°.

compressible · Oblique shock

Named alongside it

The objects these essays reach for when they reach for this one.

Oblique shock Shock wave Detachment Entropy Mach cone Model validity Total pressure Wedge Bifurcation Blunt body Bow shock Discontinuity

All concepts