Concept

Detachment — where it appears

The point at which a shock can no longer stay attached to a body's leading edge and stands off ahead of it, curved and partly normal. For a wedge or a cone it comes at the largest deflection an attached shock allows at that Mach number.

Named by 4 essays across one field — each of them below, with the objects they name alongside it.

Past 23.0° at Mach 2.00 there is no attached shock. The same wedge at two half-angles. On the left the θ–β–M relation has a root and the shock sits on the nose. On the right it has none, and the solver throws rather than returning the nearest thing — which matters, because a solver that quietly clamped to the maximum would draw a neat attached shock on a body that cannot carry one. The bow shock on the right is indicative: its shape is not solved here.

When the wedge is too blunt

Every curve of shock angle against deflection has a maximum. Past it there is no attached shock at any angle — the solver has no root to return and must say so, rather than quietly handing back the nearest thing and drawing a picture that cannot exist.

compressible · Oblique shock
A 20° cone at Mach 2: the shock at 37.80°, and a flow still compressing behind it. The conical flow round a cone of 20° half-angle at Mach 2, from the Taylor–Maccoll equation. The shock sits at 37.80° from the axis and turns the flow crossing it through only 8.57°, leaving it at Mach 1.693. Between the shock and the surface every ray from the apex carries its own state: the Mach number falls from 1.693 just behind the shock to 1.568 at the surface and the pressure rises from 1.586 to 1.912 times the free stream's — the rest of the turn, made without a shock. Nothing depends on the distance from the apex, so the rays are lines of constant state.

A cone finishes its turn after the shock

A wedge turns a supersonic stream all at once, at its shock. A cone of the same angle does not: its shock turns the flow only part of the way and leaves the rest to a smooth compression between the shock and the surface. Solved from Taylor and Maccoll's equation, the cone's shock is weaker, keeps more of the total pressure, carries less than half the wedge's surface pressure, and stays attached to 40.7° at Mach 2 where the wedge gives up at 23°.

compressible · Oblique shock
A cone hands the terminal shock a spread of Mach numbers. At Mach 2, the Mach number across the annulus a cowl on the conical shock captures, from the cone's surface to the shock, for cones of 15°, 22° and 28°, the last the best for recovery. Behind a wedge the flow is uniform; behind a cone it is fastest just behind the shock and slowest at the surface, 1.43 to 1.32 for the best cone. The terminal shock acts on all of it.

A cone intake's shock sees the whole capture

A cone's shock keeps far more total pressure than a wedge's at the same angle, because the cone finishes its turn in an isentropic compression after the shock. An intake then needs a terminal normal shock, and that shock meets not one Mach number but the whole spread the cone leaves across the captured annulus — fastest by the shock, where most of the air is, and slowest at the surface, where little is. Averaged over the mass, the cone's advantage over a wedge at the best angle for each is under two points of recovery, and the usual estimate from the surface Mach number nearly doubles it.

compressible · Oblique shock
At Mach 3 the cowl caps external compression at 88 per cent. Best recovery at Mach 3 against the number of oblique shocks, free and with the total turn capped at the free stream's detachment angle, 34.07°, which is as far as the cowl's outer surface can turn. Free, six shocks reach 94.2%; capped, 86.7%, and no number of shocks, nor a continuous isentropic ramp turning the same angle, can pass 88.5%.

The cowl caps what the ramps can buy

Every ramp in front of a supersonic intake turns the flow towards the cowl, and the cowl's outer surface has to turn the free stream at least as far. Past the free stream's own detachment angle it cannot, and that one angle caps every external intake: at Mach 3 no number of ramps, nor a smooth ramp, recovers more than 88 per cent, and the shock that is left at the throat is the strongest in the train. Above Mach 3 the cap falls fast, which is why fast intakes compress inside.

compressible · Oblique shock

Named alongside it

The objects these essays reach for when they reach for this one.

Oblique shockEntropyModel validityTotal pressureIsentropicMach coneThe θ–β–M relationWedgeBlunt bodyBow shockIntakeMach number

All concepts