Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Concept

Vena contracta — where it appears

The narrowest section of a jet issuing from an orifice, downstream of the hole itself and smaller than it. Its area relative to the hole's is what makes a discharge coefficient less than one, and for a sharp-edged slot it is computable exactly.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

The jet is 61.1% of the hole. Flow out of a slot in a plane wall, solved by Kirchhoff's free-streamline method. The outer curve is not a wall and not a guess: it is the streamline on which the pressure is ambient, and where it goes is part of the solution. It leaves the edge of the slot travelling straight down the wall and turns through ninety degrees, settling to a jet whose width is π/(π+2) = 0.6110 of the opening. Every streamline drawn is a level set of the streamfunction the conformal map supplies.

The hole that halves the flow

A jet leaving a sharp-edged hole is narrower than the hole, and by an amount that is not measured but computed. One geometry gives exactly one half from momentum alone; another gives exactly π/(π+2) from a conformal map in which the shape of the free surface is part of the answer.

applied · Jet The same reading, and only one of them gives it back. A Venturi and an orifice plate at the same diameter ratio, with the pressure along the axis drawn beneath each. Both narrow the flow by the same amount, both read the same difference between the pipe and the narrowest section, and both infer the same flow rate from it. Downstream they part company: the Venturi's diffuser turns the throat's speed back into pressure, and the orifice's jet expands into the pipe and destroys 73% of the reading. The picture is a section rather than a solved field: nothing here computes the jet, and the recirculating corner is not drawn.

The price of knowing the flow rate

Two flowmeters can narrow a pipe by the same amount, read the same pressure difference and infer the same flow rate, and cost pressures that differ by an order of magnitude. What separates them is not viscosity, and not workmanship — it is whether the flow is decelerated or abandoned.

applied · Metering The hodograph plane, where the unknown boundary is the known one. The same flow drawn in the plane of its own velocity, ζ = (u − iv)/U. The plate, whose shape is known in the physical plane, becomes a segment of the imaginary axis; the axis of symmetry becomes a segment of the real one; and the free streamline — whose shape nobody knows — becomes an arc of the unit circle, because the speed on it is exactly the free stream. The unknown and the known have changed places, which is why the problem can be solved at all.

Where the unknown boundary is the known one

A free surface is the hardest kind of boundary — its shape is part of the answer, so the region the problem is posed in is not known until the problem is solved. Draw the same flow in the plane of its own velocity and the shape becomes an arc of a circle, known in advance and exactly.

inviscid · Free-streamline Five approach profiles a meter might be looking at. The velocity across the pipe upstream of a contraction, for a uniform flow, fully developed laminar flow, two turbulent power laws and an annular jet of the kind a bend or a partly open valve leaves. All five carry the same volume flow. The meter reads a pressure difference and cannot see any of this.

The profile a meter cannot see

A differential-pressure flowmeter measures a force balance and reports a flow rate. The step between them needs two integrals of a velocity profile the instrument has no access to — and two profiles differing by half the mean velocity across the pipe give identical readings, which is why the standards specify straight pipe rather than a correction.

applied · Metering

Named alongside it

The objects these essays reach for when they reach for this one.

Bernoulli's equationContraction coefficientControl volumeDischarge coefficientBoundary conditionConformal mapConstraintFree-streamlineMeasurementAveragingThe Borda–Carnot lossExact solution

All concepts