Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
The collection

Every essay — page 36

Page 36 of 39, continuing through the fields in the same order.

Flows and fields Ideal flow Circulation and lift Viscosity Regimes and numbers Compressible flow Transition and turbulence Fluids at work What is taught wrongly Series Concepts Regimes Refutations Search

Viscosity

The thin layer next to a surface that ideal flow ignores, and which supplies drag, separation and the wake.

A wave that dies within one wavelength — 100 Hz in air. The velocity profile above an oscillating wall, at eight phases of one cycle, with depth in units of δ = √(2ν/ω). The motion is a wave travelling into the fluid, and its amplitude falls by 1/e in the same distance it turns by one radian — so it is dead within about one wavelength, and the fluid three δ up hardly knows the wall is moving at all. This is one of the very few exact solutions the Navier–Stokes equations have. The dashed line is one fixed distance above the wall in millimetres: in these units it climbs as the square root of the frequency, which is the whole of how far the motion reaches.

The wall that shakes

Slide a wall back and forth in its own plane and the fluid above it does not follow — a wave travels upwards into the fluid and dies within one wavelength. The depth it reaches is √(2ν/ω), it contains no length from the geometry at all, and the whole thing is one of the very few exact solutions the Navier–Stokes equations have.

8 figures A boundary layer with no x in it. The velocity profile over a porous wall with uniform suction: U(1 − e^{−Vy/ν}), exactly, at every station along the wall. The displacement thickness is ν/V, the momentum thickness is half of it, and the shape factor is two — all of them constants, none of them a function of distance. It is the cleanest demonstration there is that a boundary layer's thickness is a balance rather than an accumulation.

The layer that stops growing

Blasius' boundary layer thickens as the square root of distance and never stops. Suck fluid through the wall at a uniform rate and it stops immediately — the profile becomes a single exponential with no x anywhere in it, and the friction comes out exactly equal to the momentum of the fluid that was taken away.

8 figures 20.45 MPa out of a film 25 µm thick. The pressure along a tapered pad, from the closed-form solution of Reynolds' equation, with the same equation's tridiagonal grid solve drawn over it as points. The peak is 20.45 MPa — enough to yield mild steel — and it sits at 69 per cent of the way along rather than in the middle, because the pressure gradient vanishes where the film equals the harmonic mean of its two ends and the harmonic mean is biased towards the thinner one. The pad's own shape is drawn along the top, to a vertical scale of its own. Nothing pumps this oil: the runner drags it into a narrowing gap and the gap does the rest.

Nothing but the shape of the gap

A machine that holds a steel shaft off its bearing with a film of oil twenty-five microns thick has no pump in it, and the pressure it generates would yield mild steel. The mechanism is not the oil and not the speed; it is that the gap narrows.

8 figures 45° of corner, and an infinite number of eddies in it. The creeping flow in a corner of 45 degrees, drawn from Moffatt's similarity solution. Each eddy turns the opposite way to its neighbours and is 3.17 times smaller and 1.6e+3 times weaker than the one outside it. The contour levels are rescaled inside each eddy, because they differ in strength by three orders of magnitude per step and a single set of levels would show the first and nothing else — which is itself the reason nobody has seen the third. The dividing lines between eddies are drawn where the stream function changes sign, and the dots are the centres, both found from the solved field.

The eddies nobody stirs

A slow flow past the mouth of a sharp corner does not simply fail to get in. The corner fills with an infinite sequence of counter-rotating eddies, each about three times smaller and sixteen hundred times weaker than the last, and the whole structure is decided by one complex number.

8 figures The jet has to be fed from the sides. The velocity field of the plane jet with streamlines integrated through it. The seven central streamlines run down the jet and spread; the ten started at the top and bottom edges bend inwards and join it, which is entrainment and is a consequence of the solution rather than an addition to it. The dashed lines are the half-speed edges, widening as x^{2/3}. The transverse velocity far from the axis is 5.70e-3 m/s at this station, inward on both sides — a jet is a sink as seen from a distance, which is why two parallel jets pull together.

What a jet keeps, and what it collects

A jet leaving a nozzle into still fluid has no boundary anywhere and one conserved quantity. Its momentum flux is exactly the same at every station downstream; its mass flux is not conserved at all and grows without limit, because a jet is a machine for acquiring fluid it did not start with.

8 figures The core spreads and the outside never notices. The swirl velocity at four times a factor of four apart, with the free vortex Γ/2πr drawn behind them. Every curve leaves the free-vortex line at its own core radius and turns over into solid-body rotation inside it; outside the core all four are the same curve, to the precision of the plot. Viscosity has rounded off the singularity and changed nothing else. The peak swirl falls from 52.4 to 6.6 m/s across the four, and the circulation is identical for all of them.

What viscosity cannot take away

Leave a vortex alone in a viscous fluid and every local measure of it falls — the peak spin, the peak velocity, the enstrophy. The circulation round a large loop does not move at all, ever, and the far field is identical to the line vortex it started as.

8 figures The current at the surface is 45° from the wind, and nothing sets that angle. The Ekman spiral drawn as a hodograph: each point is the velocity at one depth, and depth runs along the curve. At the surface the flow is at exactly 45 degrees to the wind that drives it — not approximately, exactly, and independently of the wind, the viscosity and the latitude. By one Ekman depth the flow has turned another radian and lost 1/e of its speed; by three it is a hundredth of the surface value and pointing back the way it came. The angle is a property of the equation having two terms in it, and nothing else.

The layer that stops at a depth

Every other boundary layer grows. This one does not — rotation supplies a frequency, the balance against diffusion supplies a length, and the transport that comes out contains the stress on the surface and not the viscosity underneath it.

8 figures The wall's condition, on its way to the middle. Five profiles across the half-channel, from just inside the entrance to fully developed, each drawn at the station where it occurs. The march starts from a slab of uniform flow and never assumes a shape: what arrives at the far end is a parabola, with a centre-line speed of 1.4979 times the mean against the exact 3/2 and a momentum flux of 1.1995 against 6/5. Notice what the middle does while the edges are being slowed: it speeds up, because the flow rate is held, and that acceleration is what the entrance's extra pressure drop pays for.

How far before a duct forgets what was fed into it

A pipe is always drawn with its answer already in place. Getting there takes a distance proportional to the Reynolds number, which means a more viscous fluid is done sooner — and the entrance costs a fixed number of dynamic pressures however long the pipe is.

5 figures An oscillation with no mean, and the steady flow it drives. The steady second-order velocity through a Stokes layer, in units of U U′/ω. The first-order flow averages to zero at every height; the average of its own nonlinear term does not, and the pale curve is that forcing. Integrating it twice across the layer, with no slip at the wall and no stress at the top, gives a steady velocity that rises through the layer and settles at -0.749998 — Rayleigh's −3/4, which was not put in anywhere. Beyond about five layer thicknesses nothing more happens, which is why the number is a boundary condition for the flow outside.

An oscillation with somewhere to go

Shake a fluid back and forth over a body and it develops a steady circulation that never reverses. The driving flow has no mean at all; the mean of its own nonlinear term does, and integrating that twice across the oscillatory layer gives a slip velocity of exactly three-quarters of U dU/dx over the frequency.

8 figures The same number, by two integrals that share no arithmetic. Three flows whose dissipation is in closed form both ways. The volume route integrates the dissipation function over the fluid; the boundary route multiplies a force or a torque by the speed of whatever is applying it. Neither calculation contains the other, and the residual column is what is left when they are subtracted.

The price of a gradient

Viscosity does not charge for motion. It charges for the rate at which a parcel is being deformed, and a fluid in solid-body rotation at any speed whatever destroys nothing at all. What is charged for is a sum of squares, which is why the bill can be computed twice.

8 figures How far downstream the heat is still being made. The dissipation accumulated from a station ahead of a cylinder to a station behind it, as a fraction of the whole of what is made inside the frame, at five Reynolds numbers. At Reynolds number 1 the fluid has finished paying by about a diameter behind the body. At 100 it has not finished at five, and the curve is still climbing at the edge of the picture — the drag is a force on the body, and the heat it stands for is somewhere else.

Where the heat of a drag is made

The power it takes to tow a body through a fluid becomes heat, all of it, eventually. None of the interesting words in that sentence are the first four. It is the "eventually" that decides how a wake behaves, how far a disturbance reaches, and why no box drawn round a body contains its own bill.

7 figures The parabola is the cheapest shape the walls allow. The dissipation of the profile u = A(1 − |y/h|ⁿ) carrying a fixed flux between fixed walls, against the exponent n, divided by the parabola's. Every member of the family satisfies the same boundary conditions and carries the same fluid; they differ only in shape. The minimum is at n = 2 exactly, which is not a coincidence — it is Helmholtz's theorem, and the parabola is a solution of the equations because it is the least dissipative shape rather than the other way round.

The cheapest shape the walls allow

The parabola in a pipe is usually presented as what the equations give. It is better understood the other way round — of every profile that could carry that flow between those walls, it is the one that destroys the least energy, and the equations give it for that reason.

8 figures