The collection

Every essay — page 61

Page 61 of 61, continuing through the fields in the same order.

Flows and fields Ideal flow Circulation and lift Viscosity Regimes and numbers Compressible flow Transition and turbulence Fluids at work What is taught wrongly Series Concepts Regimes Refutations Search

Viscosity

The thin layer next to a surface that ideal flow ignores, and which supplies drag, separation and the wake.

A round jet held further from the plate arrives slower in proportion and leaves a radial wall jet stronger in proportion. For the round water jet from a 2 mm nozzle, against the nozzle's distance from the plate, each over its value at 10 cm: the arriving centreline speed, the radial invariant F = Kνh/(2π) it hands on, and the radial wall jet's peak speed 5 cm from the stagnation point; dashed, a plane jet's speed and invariant for comparison. At 40 cm the round jet arrives at 0.25 of its speed at 10 cm and hands on 4 times the invariant, and its wall jet runs 2 times as fast; a plane jet's invariant would have grown 1.59 times.

A round jet hands its wall jet a strength proportional to its throw

A round jet striking a plate spreads into a radial wall jet, and like the plane jet before it, the wall jet keeps not the jet's momentum but Glauert's flux of momentum flux — the momentum the jet brought times the fluid it gathered on the way. A round jet gathers fluid at a rate set by the viscosity alone, eight π ν per metre of travel, whatever its strength. So the invariant it hands on grows in exact proportion to the distance it was thrown, where a plane jet's grew as the cube root: hold the nozzle four times further away and the wall jet is four times as strong and runs twice as fast.

6 figures

Two spheres settle faster together than apart, faster in line than side by side, and still faster at thirty radii than either alone. The settling speed of a pair of equal spheres over a single sphere's, against the distance between their centres in radii: along the line of centres, exactly (the bispherical solution) and by Batchelor's far-field series; across it, by the series; dashed, each sphere's Stokeslet alone, 1 + 3/(2ρ) and 1 + 3/(4ρ). Touching in line the pair falls 1.55 times as fast; at 5 radii, 1.286 in line and 1.154 side by side; at 30, 1.05 and 1.025.

Two spheres settling at a slant keep their slant for ever, and three do not

Two equal spheres settling through a viscous liquid fall faster together than either alone — half as fast again if they touch in line, and still five per cent faster thirty radii apart. Slanted, the pair drifts sideways as it falls, by up to three and a half degrees, and keeps the slant, the separation and the drift for as long as it falls: the two spheres always move with exactly the same velocity. Release a third and the shape is lost at once, the middle sphere drawing ahead and the outer two closing in behind it. What a pair keeps and a trio does not is a statement about symmetry, and reciprocity is half of it.

6 figures

A sphere two per cent larger overtakes its neighbour round a path that is its own mirror image, and leaves at the offset it came in at. The centre of a sphere two per cent larger than its neighbour, relative to the smaller sphere, as it overtakes it in a viscous liquid, from four horizontal offsets; the circle is the distance at which they would touch. Each path bulges outward as it passes and is symmetric about the smaller sphere's level: from 0.85, 1.5, 2.5, 4 radii the larger sphere leaves at 0.8499, 1.5, 2.5, 4, after closest approaches of 2.27, 2.83, 3.74, 5.15 radii.

A larger sphere overtakes its neighbour and leaves on the line it came in on

Two equal spheres settling together never change their shape. Make one of them two per cent larger and the pair becomes an encounter: the larger sphere sinks past the smaller round a path that bulges out and comes back, slowed sixteenfold at contact but never stopped, and it leaves at exactly the offset it arrived with. The smaller sphere swings seven radii sideways while the larger is above it and gives every radius back while the larger is below. In Stokes flow, meeting a neighbour displaces nothing — unless the spheres touch, and a hundredth of a radius of roughness is enough to make every touching path leave on the same line.

6 figures

Pressed with one load, a steeper blade leaves a thinner film, and without a land a steep one cannot float at all. The film a loaded scraper leaves on the surface, in micrometres, against the angle its face makes with the surface, at a load of 100 N per metre of span on an ink of 0.1 Pa·s moving at 5 m/s: with a flat land 0.1 mm long under the edge, and with none. With the land the film is 110 µm at 10°, 1.69 at 30° and 0.268 at 60°. Without one it is the whole gap, 145 µm at 8°, and above 44° the gap the load needs is below a ten-thousandth of a nanometre: the edge is in contact.

A pressed blade floats on its land and leaves half the gap behind

A scraper or a doctor blade is not held at a gap; it is pressed on with a load, and it rises until the liquid it lets through carries that load. Without a flat land under its edge the liquid can carry it only through the corner's logarithm, so the gap falls exponentially with the load, and a blade steeper than about forty-four degrees cannot float at a working load at all — its edge is in contact. Give it a land a tenth of a millimetre long and the film becomes half the gap, falls as one over the load, and is a quarter of a micrometre at sixty degrees. The land is also why a blade's film grows as its edge wears.

6 figures