Concept

Trailing edge — where it appears

The sharp rear edge of an aerofoil, where the flow from the two surfaces meets. Its sharpness is what makes the circulation determinate, since the fluid cannot turn the corner and the condition that it leave smoothly picks one solution.

Named by 7 essays across 2 fields — each of them below, with the objects they name alongside it.

A Joukowski aerofoil at 8°. A cambered aerofoil in a uniform stream. The circulation is not chosen: it is whatever value makes the flow leave the sharp trailing edge smoothly, and that single condition fixes the lift.

The sharp edge decides

Ideal flow round a wing admits infinitely many solutions, each with a different lift, and all of them exact. One extra requirement — that the air leaves the trailing edge instead of whipping round it — picks a single one.

circulation · Lift

The circle plane and the aerofoil plane. A circle with a polar net around it, and the same net after the Joukowski map. Curves that crossed at right angles still cross at right angles everywhere except at the single point where the map's derivative vanishes, and that point is the sharp trailing edge.

From a circle to a wing

The flow past a circular cylinder is known exactly and is of no interest to anybody who wants to fly. A change of variable turns that circle into a wing section — and, because the change of variable preserves angles, it carries the whole solution across with it. Nothing is solved twice.

inviscid · Ideal flow

The flap moves the curve and leaves its slope alone. Lift coefficient against incidence for several flap deflections. The lines are parallel: deflecting the flap gives the section lift at an incidence where it had none, and does not change how much lift each further degree of incidence buys.

What a flap does, and what it does not

Lowering a flap gives a wing lift at an incidence where it had none. It does not make the wing more responsive to being pitched — the lift curve moves sideways and its slope does not change, and those are two quite different things to buy.

circulation · Lift $Induced drag against aspect ratio, all at C_L = 0.6. Induced drag for wings of different aspect ratio, each flown at whatever incidence makes it carry the same lift coefficient. The drag falls as one over the aspect ratio, so the longest wing here pays a fraction of what the shortest does for exactly the same load.$

The span is the whole story

Induced drag is the price of having ends, and the only thing that lowers it at a given lift is putting those ends further apart. Not more area, not a better section, not a cleverer planform — span, and everything else is a correction of a few per cent to it.

circulation · Finite wing

The section the pressure asked for. The designed section over the one it started from, both drawn to their own chords. Asking for 28 per cent more speed over the forward 62 per cent of the upper surface produces a section 15.0 per cent thick against the original's 10, with the extra thickness forward and the camber changed — none of which was asked for, and all of which is what that pressure distribution is. The pale outline is the baseline. The one thing the method cannot be told is where along the chord any of it happens: the speed is prescribed against the circle's parameter, and where a given station ends up is an output of the same solve that produces the shape.

Ask for the pressure, and see what shape that is

A designer knows what the pressure distribution has to do long before knowing what shape does it. Running the problem that way round is possible, it is exact, and it refuses more asks than it grants.

inviscid · Inverse design

Four corners, and what the flow does in each. The local flow in corners of four different interior angles, drawn from the exact local solution ψ = r^(π/α) sin(πθ/α). The exponent of the speed is π/α − 1 and depends on nothing else: at a right angle the corner is stagnant, at a flat wall nothing happens, and at any angle greater than a straight line the speed has no bound at the corner. The last panel, at 360 degrees, is the flow round the edge of a plate.

Nothing turns a sharp corner

Near a corner the flow is fixed by the angle and by nothing else — not by the size of the corner, not by the flow far away, not by the fluid. The exponent is π/α − 1, and every sharp edge in aerodynamics is the one case where it comes out at minus one half.

inviscid · Wedge flow

The trailing-edge speed against circulation, for a sharp edge and a round one. Sampled one grid point off the trailing edge. The sharp edge is singular at every circulation but one: the speed there is about U at the Kutta value and 11.3U half a Kutta circulation away, and it grows without bound as the sample approaches the edge. The round edge has no such point. That is the whole of the Kutta condition's justification, and it needs the corner.

The condition that can be bought

Ideal flow round a closed body has one solution for every circulation, and the Kutta condition picks one. Its justification is entirely the sharp edge: every other circulation puts an infinite velocity there. Take the corner away and nothing chooses — which is not a curiosity, it is what a circulation-control aerofoil is.

circulation · Circulation control

Named alongside it

The objects these essays reach for when they reach for this one.

Kutta condition Circulation Conformal map Lift coefficient Potential flow Thin-aerofoil theory Camber Joukowski Laplace's equation Stagnation point Well posedness Adverse pressure gradient

All concepts