Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Concept

Two-dimensional flow — where it appears

A flow with no dependence on and no velocity along one direction, in which the vortex-stretching term vanishes identically. That single absence gives it a second inviscid invariant, an inverse energy cascade, and a creeping-flow problem with no solution at all.

Named by 5 essays across 4 fields — each of them below, with the objects they name alongside it.

Kirchhoff's rotation rate, which a point vortex does not have. A patch of uniform vorticity bounded by an ellipse turns rigidly at omega a b/(a+b)², a rate that depends on the shape alone. It is largest for a circle, where it is unobservable, and falls away as the patch is drawn out. A point vortex has no shape and therefore no entry on this axis at all.

The shape a vortex keeps

Outside a circular patch of uniform vorticity the flow is exactly the point vortex's — not nearly, exactly — so replacing one by the other looks free. It is not. The patch has a shape, the shape has a rotation rate of its own, and there is a strain above which no shape exists at all.

inviscid · Vortex patch The sound speed of a mixture, against how much of it is gas. Wood's formula for air in water. Both ends are the pure phases at 343 and 1,481 metres a second; in between the mixture takes the water's inertia and the air's springiness and the speed collapses to twenty-four metres a second — a fourteenth of the slower constituent.

Slower than either of them

Sound travels at 343 metres a second in air and 1,481 in water. In a mixture of the two it travels at twenty-four, because the mixture takes the water's inertia and the air's springiness — and one per cent of air by volume is enough to take water down to a twelfth of its own speed.

compressible · Speed of sound The only candidate the far field allows, and the wall it slips past. The general Stokes solution has four constants; the condition at infinity kills two of them and fixes a third, leaving one to satisfy two conditions at the wall. Setting the stream function to zero there uses it up, and the tangential velocity that remains is exactly twice the free stream — for every radius, every speed, and every fluid.

The flow with no solution

Creeping flow past a sphere has a solution and everybody knows it. Creeping flow past a cylinder has none — not a difficult one, not one needing a clever method. The equations, the no-slip condition and the uniform stream at infinity are inconsistent, and the residual is exactly twice the free stream.

viscous · Stokes' paradox Four kinds of critical point, and the curve that separates them. The invariants of a trace-free velocity gradient, with the discriminant curve 27R²/4 + Q³ = 0 drawn through them. Inside the two upper lobes the cubic has one real root and a complex pair, which is a spiral being stretched along its own axis on the left and squeezed on the right; below the curve all three roots are real and the point is a node with two saddle directions. Of 820 random incompressible gradients, 509 land in the spiral region and 311 in the real one. A plane flow is the vertical line R = 0 and nothing else, which is why a plane has two kinds and space has four. The marked points are the cases the calculation checks that fall inside this window; the two vortex cases it also checks sit at Q = 3.25 and |R| = 4.25, off the top corners, because a window wide enough to hold them would flatten the curve the figure is about.

Two kinds is a plane flow's privilege

A plane incompressible flow has a saddle or a centre and nothing else, and the proof is one line about a trace. The same line in three dimensions constrains three numbers instead of two, which is far less, and what it leaves is four kinds of point separated by a curve — with the one a plane cannot have being the structure the whole of turbulence is made from.

kinematics · Topology Three lobes, then a filament. An ellipse of aspect ratio 4 with a three-lobed bump of three thousandths, as contour dynamics carries it, drawn in the frame turning with the undisturbed ellipse at t = 0, 30 and 42. By t = 30 the bump has grown to a visible three-fold asymmetry — one end fattened, the other thinned — and by t = 42, about a turn and a tenth of the ellipse, the thinned end is being drawn out into a filament. The march is stopped there, while the area is still conserved to a few parts in a thousand; resolving the filament needs a contour that adds nodes, which this one does not.

Past three, an ellipse is a shear layer

Kirchhoff's elliptical vortex turns for ever without changing shape, and Love showed in 1893 that it stops being stable at an aspect ratio of exactly three. Computed, that threshold turns out to be the first of a sequence — a new way of coming apart every one and a half aspect ratios — and the sequence ends somewhere recognisable. A long enough ellipse is a strip of vorticity, and it comes apart the way a shear layer does, at a rate Rayleigh found for the strip.

inviscid · Vortex patch

Named alongside it

The objects these essays reach for when they reach for this one.

Model limitVorticityContour dynamicsEquilibriumKirchhoff ellipseStrain rateVortex patchBernoulli's equationBoundary conditionCavitationCirculationCompressibility

All concepts