Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Concept

de Laval nozzle — where it appears

A duct that converges to a throat and then diverges, which is the only shape that accelerates a flow through the speed of sound. The reversal happens because the area relation changes sign there, so the same shape decelerates a subsonic flow.

Named by 5 essays across one field — each of them below, with the objects they name alongside it.

A duct does the opposite thing above Mach one. The four cases of dA/A = (Ma² − 1) dV/V. Below the speed of sound a narrowing duct accelerates the flow, which is what continuity leads anyone to expect. Above it the sign of the bracket flips, and a narrowing duct decelerates: density is falling faster than the speed is rising, so the stream tube needs more room rather than less.

The duct that works backwards

Squeeze a pipe and the flow speeds up. Everyone knows this, it follows from continuity, and above the speed of sound it is false — a narrowing duct decelerates a supersonic stream, because the density is falling faster than the speed is rising.

compressible · Area mach The throat stops listening: mass flow against back pressure. Mass flow through a convergent nozzle, normalised on its choked value, as the back pressure is lowered. It rises until the throat reaches Mach one and then stops, exactly. Below that pressure the throat is sonic and nothing downstream can send a signal upstream to ask for more, so the flow does not respond however far the back pressure falls.

The throat that stops listening

Lower the pressure downstream of a nozzle and more gas flows through it. Keep lowering it and, at a definite point, the flow stops responding — not gradually, but completely, because the news that the pressure has fallen can no longer travel upstream.

compressible · Area mach One nozzle, five back pressures, five different flows. The duct above, and the static pressure along it below, computed station by station from the local area. Where a shock stands inside the divergent section its position was solved for rather than placed: the shock spends total pressure, which sets the subsonic Mach number at the exit, which has to match the imposed back pressure.

One area, two answers

The area of a duct at a station fixes the Mach number there — twice over. A ratio of 2.5 is satisfied at Mach 0.24 and again at Mach 2.44, nothing local chooses between them, and where the choice cannot be made consistently a shock appears inside the duct to join the two.

compressible · Area mach A cone sends 1.7 per cent of its jet's momentum sideways at 15°. A conical divergent section of 15° half-angle and exit area ratio 25, drawn to scale from its throat to its lip, with its virtual apex to the left. The gas leaves as a source flow: straight streamlines from the apex, each at its own angle, and a Mach number uniform on spheres centred there. On the spherical cap through the lip the flow is normal to the surface and uniform, at Mach 3.925 for a gas with γ = 1.2; its axial momentum is ρV² times the cap's projection onto the exit disc, while the mass crossing it is ρV times the cap itself. The ratio of the two areas is (1 + cos α)/2 = 0.9830, and it is the only thing the cone's shape does to the momentum. On the flat exit plane the flow is not uniform: its edge is further from the apex than its centre, and the Mach number there is higher.

The jet a cone sprays sideways

The one-dimensional nozzle sends all its gas straight out along the axis. A real divergent section is a cone, and the gas leaves it as a spray of straight lines from the cone's apex. Only the axial part of that momentum pushes, and the share that does is (1 + cos α)/2 — 98.3 per cent at fifteen degrees, 93.3 at thirty — whatever the gas, the Mach number or the area ratio, and it touches the momentum and never the pressure.

compressible · Area mach With friction the flow goes sonic after the throat, and leaves slower. The Mach number along a convergent–divergent nozzle of exit area ratio 2.5, for friction lengths 4fL/Dₜ of 0, 0.2 and 1, each solution passing smoothly through Mach 1 at the point where the sonic condition holds. Without friction that point is the throat, at x = 0.42. With friction it moves downstream — to 0.4357 and 0.4996 — and the throat itself is subsonic, at Mach 0.965 and 0.852. The exit Mach number falls from 2.443 to 2.247 and 1.747. The throat is where the area is least; the sonic point is where the widening has caught up with the friction, and the two coincide only when there is none.

Friction moves the sonic point past the throat

A choked nozzle is sonic at its throat — in a nozzle with frictionless walls. With friction the flow reaches Mach one where the section's widening rate has caught up with the friction, which is downstream of the throat, and the throat itself is subsonic. The solution through that point is a saddle that can only be found from the inside, and the mass flow it passes is less than the throat's area allows.

compressible · Area mach

Named alongside it

The objects these essays reach for when they reach for this one.

Area machMach numberChokingSonic throatStagnation pressureIsentropicModel limitBack pressureBoundary-valueCompressibilityContinuityControl volume

All concepts