Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Concept

Sonic throat — where it appears

The narrowest section of a nozzle, and the only place a flow can pass through the speed of sound. Once it is sonic the mass flow is fixed, and lowering the downstream pressure further changes nothing upstream of it.

Named by 5 essays across 2 fields — each of them below, with the objects they name alongside it.

A duct does the opposite thing above Mach one. The four cases of dA/A = (Ma² − 1) dV/V. Below the speed of sound a narrowing duct accelerates the flow, which is what continuity leads anyone to expect. Above it the sign of the bracket flips, and a narrowing duct decelerates: density is falling faster than the speed is rising, so the stream tube needs more room rather than less.

The duct that works backwards

Squeeze a pipe and the flow speeds up. Everyone knows this, it follows from continuity, and above the speed of sound it is false — a narrowing duct decelerates a supersonic stream, because the density is falling faster than the speed is rising.

compressible · Area mach The throat stops listening: mass flow against back pressure. Mass flow through a convergent nozzle, normalised on its choked value, as the back pressure is lowered. It rises until the throat reaches Mach one and then stops, exactly. Below that pressure the throat is sonic and nothing downstream can send a signal upstream to ask for more, so the flow does not respond however far the back pressure falls.

The throat that stops listening

Lower the pressure downstream of a nozzle and more gas flows through it. Keep lowering it and, at a definite point, the flow stops responding — not gradually, but completely, because the news that the pressure has fallen can no longer travel upstream.

compressible · Area mach Two depths for the same energy, and one for the least. Specific energy against depth for a discharge of 0.5 square metres per second per metre of width. Every energy above the minimum is carried by two different depths — one fast and shallow, one slow and deep — and the minimum is carried by exactly one. That depth is the critical depth, the Froude number there is one, and the least energy is three halves of it; all three are found here by search and checked against their closed forms.

The depth that costs least

For a given flow there are two depths that carry it at any energy above a floor, and exactly one at the floor. That one depth is where the Froude number is one, the least energy is exactly three halves of it, and a bump in the bed that asks for more than the flow has does not thin the water — it backs it up.

applied · Open-channel With friction the flow goes sonic after the throat, and leaves slower. The Mach number along a convergent–divergent nozzle of exit area ratio 2.5, for friction lengths 4fL/Dₜ of 0, 0.2 and 1, each solution passing smoothly through Mach 1 at the point where the sonic condition holds. Without friction that point is the throat, at x = 0.42. With friction it moves downstream — to 0.4357 and 0.4996 — and the throat itself is subsonic, at Mach 0.965 and 0.852. The exit Mach number falls from 2.443 to 2.247 and 1.747. The throat is where the area is least; the sonic point is where the widening has caught up with the friction, and the two coincide only when there is none.

Friction moves the sonic point past the throat

A choked nozzle is sonic at its throat — in a nozzle with frictionless walls. With friction the flow reaches Mach one where the section's widening rate has caught up with the friction, which is downstream of the throat, and the throat itself is subsonic. The solution through that point is a saddle that can only be found from the inside, and the mass flow it passes is less than the throat's area allows.

compressible · Area mach A flap a fifth of the chord long, turned in three and a half degrees, starts the biplane at Mach 1.72 instead of 2.15. The Mach number at which the channel between the elements swallows the normal shock at its mouth, against the leading-edge flap's deflection, for flaps of 0.1, 0.2, 0.3 and 0.4 of the chord; the deflection runs from shut to the ramp's own angle, 3.43°, where the flap lies flat. Shut, the channel starts at 2.15; flat, at 1.93 (0.1), 1.72 (0.2), 1.53 (0.3), 1.32 (0.4). The design Mach number is 1.944.

A flap that closes the mouth starts Busemann's biplane below its design point

Busemann's biplane cancels its own waves at one Mach number and cannot get there: its channel narrows to a throat that will not swallow the shock standing in its mouth until the aeroplane is flying faster than the design point. Hinge the front of each element's inner ramp and turn it into the channel, and the mouth closes towards the throat while the throat stays put. A flap a fifth of the chord long, turned in three and a half degrees, starts the channel at Mach 1.72 instead of 2.15; once started, the flaps can shut at any speed above 1.60 and the zero at the design point returns exactly.

compressible · Wave drag

Named alongside it

The objects these essays reach for when they reach for this one.

Area machChokingde Laval nozzleMach numberModel limitStagnation pressureAnalogyBernoulli's equationCompressibilityConservationContinuityControl volume

All concepts