Concept

Operating point — where it appears

The state at which a machine and the system it drives agree, where the machine's curve of output against flow crosses the system's curve of demand. It is found by laying one characteristic across the other, and it is stable only if a small departure brings the two back together.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

Where a motor's line crosses the film's own characteristic. The stress a self-heating film carries against the speed it lets one wall slide past the other, both scaled, for every steady state (solid): it rises while the film is cool, peaks at the fold and falls as the film heats and thins. A motor's torque falls along a straight line as its speed rises (dashed), and the film runs where the two cross. A stiff drive crosses once. A soft drive, shallower than the falling limb's steepest slope, 0.0738, can cross three times. A drive held at a fixed stress is a flat line, and at the fold's stress it only touches.

A motor turns the runaway into a jump

A self-heating oil film has a fold at fixed stress and none at fixed speed, and a real motor is neither: its torque falls along a line as its speed rises. Put that line across the film's own torque–speed curve and the runaway disappears for any motor at all. What replaces it depends on the line's slope. A drive softer than one fourteenth of the cold oil's resistance jumps to a hot state and keeps a memory of the load; a stiffer one does neither. And the boundary between the two falls exactly where the motor is turning at a quarter of its no-load speed, which no motor near its rated speed can reach.

viscous · Viscous heating

Every rotor lands on the same hot state, later and more smoothly. The centre temperature against time, on a logarithmic axis, for a soft drive five per cent past its fold switched on from rest, with rotors of four inertias. Each climbs, lingers and jumps, and each ends at the hot operating point without overshooting it. The time to pass three e-folds is 7, 16, 101, 948 diffusion times for M = 0, 0.1, 1, 10.

A rotor's inertia slows the jump and cannot make it ring

Give the motor driving a self-heating oil film a rotor that has to spin up, and there are two clocks: the film's diffusion time and the rotor's. Two clocks are what an oscillator is usually made of, and this pair cannot make one. Every eigenvalue stays real at every inertia, because the film and the rotor only ever push each other the same way. What inertia does instead is add its own delay to the film's, and in a real machine, where the rotor is hundreds of times slower, the delay past the fold is almost entirely the rotor's.

viscous · Viscous heating

An S-shaped set of states and a slow variable that crosses it. The film's steady mean temperature against the housing's, on the cool and hot branches of operating points, with the line on which the housing is in equilibrium with the film, at a derating of 0.22 per unit. Between housing temperatures 1.24 and 1.59 both branches exist. At the derating the essay uses, 0.22, neither meets the equilibrium line there: on the hot branch the housing is always warming, on the cool branch always cooling, so the film runs round the loop drawn over them, jumping at each fold.

A slow sensor makes the bearing cycle

Derate the motor driving a self-heating oil film on the temperature of its housing, which warms over minutes, and a protection meant to hold the bearing cool instead makes it cycle for ever: jump hot, warm the housing until the hot state is lost, drop cool, let the housing cool until the cool state is lost, jump again. The period belongs to the housing, the amplitude belongs to the film, and the derating strength decides only whether the cycle happens at all.

viscous · Viscous heating

Named alongside it

The objects these essays reach for when they reach for this one.

Bifurcation Lubrication film Model limit Stability Thermal runaway Unsteady Viscous heating Hysteresis Oscillation Inertia Temperature

All concepts