Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Concept

Pressure — where it appears

The isotropic part of the stress in a fluid, which acts equally in every direction and does no work unless the fluid's volume changes. It has no speed of its own in an incompressible flow: a change anywhere is felt everywhere at once.

Named by 12 essays across 6 fields — each of them below, with the objects they name alongside it.

A source at Mach 0.55, and the sound it has already made. Each circle is one pressure pulse, expanding at the speed of sound from the point the source was at when it left. Below the speed of sound every circle still contains the source, so the pressure disturbance reaches every point of the fluid before the source does. Above it the circles have an envelope, and outside that envelope nothing has been heard at all.

What a signal travels at

Air finds out that an aeroplane is coming, and it finds out at a definite speed. That speed does not depend on how hard the air is squeezed or on how much of it there is — only on how hot it is — and every result in compressible flow is downstream of that one fact.

compressible · Speed of sound What a barometer on the wing would read at 60 m/s. The absolute pressure along an aerofoil's surface, in kilopascals, with the atmosphere put back. Nothing on the wing is near zero: the deepest point of the so-called suction peak is a few per cent below a hundred kilopascals, and the air there is still pushing on the wing hard enough to hold up a column of itself eight kilometres tall. The lift is the difference between two large pushes, not a pull.

Nothing sucks

The upper surface of a wing is universally described as being under suction, which sounds like a pull. A fluid cannot pull. The lowest absolute pressure on a wing at sixty metres a second is 96 kilopascals — a five per cent dip in a hundred — and the force does not depend on where zero was put, because the normals of a closed body sum to nothing.

misconceptions · Suction The pressure, relaxed rather than quoted. The pressure field round a cylinder, obtained by relaxing ∇²p = −ρ∇·(u·∇u) on a body-fitted polar lattice with the exact pressure on the surface and on a far circle. The interior was told nothing except the velocity gradients. It agrees with Bernoulli's closed form everywhere to under two parts in ten thousand of the dynamic pressure, which is the strongest statement this site can make that the elliptic equation is the pressure's own.

Pressure has no speed

Take the divergence of the momentum equation for an incompressible flow and the time derivative disappears, the viscosity disappears, and what is left is Poisson's equation. Pressure is not carried anywhere: it is whatever satisfies an elliptic equation everywhere at once, and that is a statement about a fluid nobody has.

inviscid · Pressure 20.45 MPa out of a film 25 µm thick. The pressure along a tapered pad, from the closed-form solution of Reynolds' equation, with the same equation's tridiagonal grid solve drawn over it as points. The peak is 20.45 MPa — enough to yield mild steel — and it sits at 69 per cent of the way along rather than in the middle, because the pressure gradient vanishes where the film equals the harmonic mean of its two ends and the harmonic mean is biased towards the thinner one. The pad's own shape is drawn along the top, to a vertical scale of its own. Nothing pumps this oil: the runner drags it into a narrowing gap and the gap does the rest.

Nothing but the shape of the gap

A machine that holds a steel shaft off its bearing with a film of oil twenty-five microns thick has no pump in it, and the pressure it generates would yield mild steel. The mechanism is not the oil and not the speed; it is that the gap narrows.

viscous · Lubrication Ninety microseconds, and most of it spent barely moving. The radius of a collapsing cavity against time, both as fractions of their own totals. The bubble spends most of the collapse near its original size and the last few per cent of the radius in the last fraction of a per cent of the time. The total is 91.47 microseconds for a millimetre cavity at one bar, computed by quadrature and agreeing with the closed form in gamma functions to a part in 10⁹.

The bubble that hammers

A vapour cavity swept into higher pressure does not deflate. It collapses, in ninety microseconds for a millimetre bubble, and the model that describes the collapse predicts a wall speed that reaches the speed of sound in water at three per cent of the original radius — which is to say it predicts its own failure, and locates it.

applied · Cavitation A steady pressure field, from a flow with no steady part. The time-averaged pressure round a cylinder in a stream that oscillates as U₀cos ωt. The mean velocity is exactly zero at every point — the flow spends as long going one way as the other — and the mean pressure is not, because pressure depends on the square of the speed and a square has no sign. The mean coefficient reaches -2.00 at the shoulders and averages -1.00 over the surface, and its resultant is 6.6e-16: a real field with no force in it. The pale lines are the instantaneous streamlines, which reverse every half cycle.

The mean is not the flow

Average an unsteady flow and the result is a new object with its own properties, and it is not a solution of anything. An inviscid stream oscillating about zero has a mean velocity of exactly nothing everywhere, a mean pressure that reaches minus two dynamic pressures at the shoulders, and a missing term in its own momentum equation that can be written down in closed form.

kinematics · Averaging Three contours, one force, three different accounts of it. The same vortex, and the same total force on it, computed by a momentum balance over three contours of the same area. All three give ρUΓ to eight figures. What differs is the bookkeeping: the tall box gets 16 per cent of it from pressure and the rest from momentum flux, the wide box gets 84 per cent from pressure, and the circle gets exactly half. Neither part converges on its own as the contour is enlarged — each falls off like 1/r while the contour grows like r — so the split is a property of the shape of the limit rather than of the flow.

Where the reaction to a wing's lift is

The force on a body can be computed on any contour drawn round it, and the answer is the same every time. How much of that answer is pressure and how much is momentum flux is not — it runs from three per cent to ninety-seven, and the difference is the shape of the contour.

inviscid · Far field A film with nothing useful to show for itself. The pressure under two discs squeezed together, as a fraction of the pressure at the centre. It is a parabola, and it holds an enormous load — but nothing is sliding, so there is no output at all and every joule put in becomes heat in the oil. The two routes to that heat share no arithmetic: one integrates the dissipation function over the film, the other multiplies the force by the approach speed.

The last of the oil

A wet plate on a table is held down by nothing but the difficulty of getting air in underneath it. The force required to separate two flat surfaces with a film between them goes as the inverse cube of the gap, which means there is no finite energy that removes the last of the film and no finite time in which it drains away.

viscous · Squeeze film Identical lift at every altitude, and the skin load nearly doubles. The same wing at the same dynamic pressure at seven altitudes. The lift is identical at every one of them — the flat line, computed from the absolute pressures rather than assumed, because a net force cannot depend on where the pressure datum is set. The load on a vented panel is identical too, at 4.86 kPa, because both sides of it moved together. The load on a sealed panel with 75.26 kPa inside is not: it is 28.27 kPa at sea level and 60.84 kPa at twelve kilometres. The datum cancelled in the force and it is one of the two numbers in the stress.

A force forgets the datum, a stress cannot

Nothing sucks, because the pressure datum cancels — the normals of a closed body sum to nothing, so the lift is the same in gauge or absolute pressure. That identity is about a resultant, and it is routinely carried one step too far. The load on a panel of skin has the ambient in it as one of two numbers, not as a datum.

misconceptions · Suction A degree of temperature is worth 0.34 per cent of pressure. The error in the pressure a paint reports, against how much warmer the surface is at the test condition than at the reference, at four pressures. At 0.8 of the reference pressure the sensitivity is -0.34 per cent of pressure per kelvin, so 10 degrees is -3.45 per cent. That is not a small number against what the technique is used to measure, and a model's surface temperature is not uniform: it is warmer where the flow has been brought to rest and cooler where it has accelerated, which means the temperature error is largest exactly where the pressure gradients are. The standard remedy is a second, temperature-sensitive paint measured at the same time — an instrument added to correct an instrument.

The paint that measures the wrong field

Dye, seeded particles and the optical methods all look through the flow or at something put in it. Pressure-sensitive paint looks at the surface, reports a scalar rather than a derivative, and turns a row of taps into a field. What quenches its luminescence is oxygen, which is what makes it a pressure gauge — and temperature, which is the other field a flow is guaranteed to produce.

misconceptions · Visualisation A pure number with no fluid in it. The load a plane slider bearing carries, divided by everything dimensional in it. What is left is a function of the convergence ratio alone — no viscosity, no speed, no size, no material — so the tilt that carries the most load is decided before anything about the machine is known. It is the root of one transcendental equation, at 2.1887048.

The gap that carries the most

A bearing's most consequential dimension is decided by a number with no oil in it, no speed and no size — the root of one transcendental equation, at 2.1887048. And the maximum it sits on is flat enough that the value printed in every handbook is not it.

viscous · Lubrication Four solved flows, and the minimum is on the surface in every one. Sampling the whole exterior of each body on a grid and comparing the lowest pressure found there with the lowest found on the surface. The surface wins by a margin that is not marginal — between 0.18 and 0.56 in pressure coefficient — and it wins for a reason rather than by luck: the pressure of an irrotational flow is superharmonic, and a superharmonic function has its minimum on a boundary.

The lowest pressure is on the body

In an ideal flow the minimum pressure is always on a surface — not usually, not for the shapes people draw, always. The proof is an identity about the velocity gradient, and the identity says exactly which flows are exempt.

inviscid · Ideal flow

Named alongside it

The objects these essays reach for when they reach for this one.

CavitationModel limitPressure coefficientBoundary conditionMeasurementMisconceptionPotential flowReynolds equationSpeed of soundSuctionAbsolute pressureBernoulli's equation

All concepts