Concept

Bubble — where it appears

A pocket of gas or vapour inside a liquid, bounded by an interface whose tension pushes inward with a pressure of 2σ/r. It grows once the surrounding liquid falls below the pressure that balances that tension, and a bubble filling a tube's bore rises at a speed set by the bore rather than by its own length.

Named by 3 essays across 3 fields — each of them below, with the objects they name alongside it.

$Two-thirds to one, and nothing outside it. The drag on a spherical drop as a fraction of Stokes' drag on a rigid sphere of the same size, against the ratio of the viscosities. It runs from exactly two-thirds for a clean gas bubble to exactly one for a rigid particle and takes no value outside that range, however light or heavy the drop is — the formula has no density in it anywhere. A drop of water in air and a drop of mercury in water sit at opposite ends of it.$

The surface that moves with the flow

A clean gas bubble feels two-thirds of the drag a rigid sphere of the same size would, and the formula has no density in it anywhere. What buys the third is that the bubble's surface is free to move — and real bubbles in ordinary water do not get it, for a reason that is a millionth of a per cent of the water by mass.

viscous · Mobile interface

A litre of water at the crown carries 77 mL of gas it cannot hold. The volume of free gas a litre of air-saturated water can release at a siphon's crown, at the crown's own pressure, against that pressure, on a logarithmic scale, at three temperatures. It is zero at atmospheric and grows without limit towards the vapour pressure. At the reference siphon's starting crown pressure of 51.5 kPa it is 20.6 mL, a supersaturation of 2.02; at the frictionless floor of 23.0 kPa it is 76.7 mL, a supersaturation of 4.79. Cold water carries more: 87.4 mL at 5 °C. This is the equilibrium bound — what would come out if the water stayed long enough, which it does not.

The air that breaks a siphon nothing else can

A running siphon's heights cannot break it, and its friction only postpones the moment it is most exposed. What does break a siphon that has run for a day is the air dissolved in its water, which the crown's low pressure leaves the water carrying far more of than it can hold — and which gathers only once the flow is too slow to carry a bubble away.

misconceptions · Siphon

In clean water a bubble rises nearly three times as fast as the same bubble in tap water. The terminal rise speed of an air bubble in water at 20 °C against its radius, from buoyancy balanced against drag: with a clean, shear-free surface using Moore's law, and with a surface immobilised by contamination using the rigid-sphere correlation. At 0.3 mm the clean bubble rises at 13.0 cm/s against 6.7; at 0.5 mm at 31.0 against 11.2, a factor of 2.76. Beyond a radius of 0.47 mm the clean bubble's Weber number passes one, its shape flattens, and a spherical calculation stops describing it; that region is shaded. Nothing about the bubble's size, gas or liquid changes between the two curves — only whether its surface can move.

The vorticity a clean surface cannot refuse

A clean bubble's surface cannot hold a shear stress, and it is easy to conclude that it makes no vorticity. On a curved surface it must carry exactly 2κu — three times the speed over the radius at a sphere's equator, whatever the Reynolds number. That is so much weaker than a rigid wall's that the flow stays irrotational to leading order, and the bubble's drag is the dissipation of that irrotational flow: 48/Re, three to ten times below a rigid sphere's.

kinematics · Boundary conditions

Named alongside it

The objects these essays reach for when they reach for this one.

Boundary condition Dissipation Model limit Potential flow Absolute pressure Boundary layer Cavitation Creeping flow d'Alembert's paradox Drag Drag coefficient Drop

All concepts