Concept

Entry length — where it appears

The distance along a duct over which a flow's velocity or temperature profile adjusts from its inlet shape to the shape that no longer changes downstream. It is quoted to a tolerance, and different tolerances give lengths that differ severalfold.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

Also named here as graetz, nusselt number — the same set of essays touches all of them, so they are one junction rather than several.

The number a duct settles at is an eigenvalue. The local Nusselt number against x⁺ = x/(D·Re·Pr), from a Crank–Nicolson march that contains no eigenvalue anywhere. It settles at 3.6568, which is λ₀²/2 for the Graetz eigenvalue problem — a completely separate calculation. The mark at x⁺ = 0.05 is the entry length every textbook quotes: it delivers a Nusselt number 1.45 per cent above the developed value, which is a perfectly reasonable tolerance and is never the one stated.

How far before the heat arrives

A duct's thermal entry length is quoted everywhere as x/(D·Re·Pr) = 0.05, with no tolerance attached. Working out what it delivers gives a Nusselt number 1.45 per cent above the developed value — and the developed value itself is not a term ratio at all but an eigenvalue, 3.6568, which is also the rate at which the duct forgets its inlet.

regimes · Peclet

The entrance grows with the Péclet number, peaks, and then shrinks. The distance from a wall-temperature step at which the local Nusselt number has come within 5 per cent of its developed value, in diameters, against the Péclet number, for turbulent pipes at Reτ = 500, 1000, 2000 and 5000, with the slug's laminar line L/D = 0.029·Pe. The liquid metals sit on the line; the entrance peaks at 11.6 diameters at Pe ≈ 4700 for Reτ = 1000 and falls to about three and a half diameters for water.

The longest thermal entrance belongs to neither metal nor gas

A liquid metal carries its heat across a turbulent pipe by conduction, as a laminar flow would, and so its thermal entrance should be long. It is long only when its Péclet number is large. Below a few hundred the entrance grows in proportion to the Péclet number with the constant of a fluid moving as a solid block, and it leaves that scaling close to the threshold at which the eddies first match conduction. The longest entrance in a turbulent pipe belongs to the fluids between the metals and the gases, and how long it is depends on a number the measurements have never pinned down.

regimes · Peclet

Named alongside it

The objects these essays reach for when they reach for this one.

Eigenvalue Graetz Heat transfer Nusselt number Peclet number Threshold Convergence Dimensionless Eddy viscosity Mixing length Model limit Prandtl number

All concepts