Fluid Flow & Aerodynamics
why things fly, and why the usual explanation is wrong
Concept

Wall jet — where it appears

A jet running along a solid surface into fluid at rest, held to it because the surface seals the side its entrainment would draw fluid from. It thickens and slows as it entrains, and on a convex surface it separates once the pressure recovery it must manage exceeds what its layer can take.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

Every curved streamline has a pressure gradient across it. Twelve points in the flow past a cylinder, with the arrow at each showing the pressure gradient across the streamline. It points away from the centre of curvature everywhere, and its size is ρq²κ: the fluid is being pushed round a bend, and something has to do the pushing. Both sides are computed here and they share no arithmetic — one is Bernoulli's pressure differenced across the flow, the other is the turning rate of the velocity direction along it — and they agree to 6.7e-5. This is the whole content of the effect usually named after Coandă, and it is happening on every curved streamline of every flow.

The effect that explains nothing

A jet follows a curved wall and the wall feels a suction. Both are real, both are famous, and naming them after Coandă explains neither — what is happening is the normal component of Euler's equation, and it holds on every curved streamline in every flow.

misconceptions · Coanda A water sheet two millimetres thick leaves the lip above 0.270 m/s. The effective tension of a sheet of water, 2σ − ρU²h per metre of its width, against the speed it is poured at, for sheets one, two and four millimetres thick. At rest every sheet carries the tension of its two surfaces, 145.4 mN/m, and the momentum it carries along itself subtracts from that. A 1 mm sheet reaches zero at 0.382 m/s, a 2 mm sheet reaches zero at 0.270 m/s and a 4 mm sheet reaches zero at 0.191 m/s. Below its own crossing a sheet bent round a lip is pulled onto it; above, it is flung off. The quantity that decides is a tension, not a pressure, and the speed at which it vanishes is the speed of waves along the sheet.

The teapot effect is a tension, not a pressure

A slow pour runs back under a spout and down its outside, and the name it is usually given is the Coandă effect. The Coandă effect borrows the ambient pressure, and a liquid in air has none to borrow. A liquid sheet is held to a lip by its own surface tension, and it lets go at the one speed that tension cannot carry — the speed of waves along the sheet — whatever the lip's radius.

misconceptions · Coanda One rim, one drop, every angle in the band. Water on a disc the size of a US cent, 19.1 mm across, pinned at its rim. The faint outlines are the drop at apparent angles of 60°, 90°, 120° and 150°; the dark one is the drop at the angle set, 120°, holding 1.13 mL. The rim stays put while the angle climbs, and every shape is an equilibrium: 0.52 mL at 60°, 1.44 mL at 150°. They are flattened by gravity into puddles with rounded edges, not spherical caps.

An edge holds any angle it is given

A liquid's contact angle is taught as a property of the liquid and the solid. On a smooth face it is. On a sharp edge the line stops, the angle is free to take any value in a band as wide as the edge is sharp, and that freedom is how a coin carries a dome of water and a glass stands full above its brim.

misconceptions · Coanda A round jet held further from the plate arrives slower in proportion and leaves a radial wall jet stronger in proportion. For the round water jet from a 2 mm nozzle, against the nozzle's distance from the plate, each over its value at 10 cm: the arriving centreline speed, the radial invariant F = Kνh/(2π) it hands on, and the radial wall jet's peak speed 5 cm from the stagnation point; dashed, a plane jet's speed and invariant for comparison. At 40 cm the round jet arrives at 0.25 of its speed at 10 cm and hands on 4 times the invariant, and its wall jet runs 2 times as fast; a plane jet's invariant would have grown 1.59 times.

A round jet hands its wall jet a strength proportional to its throw

A round jet striking a plate spreads into a radial wall jet, and like the plane jet before it, the wall jet keeps not the jet's momentum but Glauert's flux of momentum flux — the momentum the jet brought times the fluid it gathered on the way. A round jet gathers fluid at a rate set by the viscosity alone, eight π ν per metre of travel, whatever its strength. So the invariant it hands on grows in exact proportion to the distance it was thrown, where a plane jet's grew as the cube root: hold the nozzle four times further away and the wall jet is four times as strong and runs twice as fast.

viscous · Free shear

Named alongside it

The objects these essays reach for when they reach for this one.

CoandaMisconceptionEntrainmentFree surfaceModel limitMomentum theoremStreamline curvatureSurface tensionThin filmYoung laplaceAxisymmetricBernoulli's equation

All concepts